General Service

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E4 - OAL 42mm 1/4" D...

Hard-to-find bit-sockets to service "Figure 8" screws on old GM cars, trucks & some non-automotive applications Applications include headlight...

4" / 102mm long for deep-reach applications 2-piece construction for high torque applications 3/8" drive Size: 6mm MADE IN USA

Size: 12mm OAL: 2-1/4" 1/2" drive For applications with limited clearance Applications Make Model Year Audi 100 1989-1994 Audi 100 Qu...

Low-profile U-Joint E10 "Star" Socket designed to access hard to reach fasteners 34mm long and 13.8mm wide with 1/4" square drive allows for acces...

12 point semi deep mini flip sockets with ¼” drive include two hex sizes Designed to reduce work time OAL: 1.5" (38cm) Size: 13mm...

12 point semi deep mini flip sockets with ¼” drive include two hex sizes Designed to reduce work time OAL: 1.5" (38cm) Size: 9mm/...

Provides access to extra-long bolts in recessed areas, as found on some bumper, rear lamp & door hinge fittings, valve cover bolts, & more...

14mm impact socket with internal edge 3/8" square drive Use with VibroShock Impact Tool Kit - CTA#1000 Removes frozen...

13mm impact socket with internal edge 3/8" square drive Use with VibroShock Impact Tool Kit - CTA#1000 Removes frozen...

12mm impact socket with internal edge 3/8" square drive Use with VibroShock Impact Tool Kit - CTA#1000 Removes frozen...

11mm impact socket with internal edge 3/8" square drive Use with VibroShock Impact Tool Kit - CTA#1000 Removes frozen...

10mm impact socket with internal edge 3/8" square drive Use with VibroShock Impact Tool Kit - CTA#1000 Removes frozen...

9mm impact socket with internal edge 3/8" square drive Use with VibroShock Impact Tool Kit - CTA#1000 Removes frozen ...

8mm impact socket with internal edge 3/8" square drive Use with VibroShock Impact Tool Kit - CTA#1000 Removes frozen ...

Articulated wrench only Use with VibroShock Impact tool kit - CTA#1000 Heavy duty design with chrome plate finish Removes frozen or rusted screws...

Mortorq Socket Size: "4" 3/8" square drive Also available in a set of 5 - CTA Part # 8140

Mortorq Socket Size: "3" 3/8" square drive Also available in a set of 5 - CTA Part # 8140

Mortorq Socket Size: "2" 3/8" square drive Also available in a set of 5 - CTA Part # 8140

Mortorq Socket Size: "1" 3/8" square drive Also available in a set of 5 - CTA Part # 8140

Mortorq Socket Size: "0" 3/8" square drive Also available in a set of 5 - CTA Part # 8140

The ultimate escape tool designed to get you out of your seat belt and out of your care safely in the event of a roadside emergency Constructed ...

For use in tight spaces 3.5" (90mm) long hardened jaws Adjust from 1.2" - 3.5" (30mm - 90mm) Thin Jaw Bearing Remover

Service fuel, vacuum, hydraulic and refrigeration lines Offset hex-head will not round soft flare nuts 3 Pc. Set # A855, A857, A859 3 Pc. Flar...

11" / 28cm long Handle stores extra razors Includes 2 standard and 1 plastic blade

Blade holder swivels out from inside handle and locks in 3 positions Includes 1 blade Swivel Razor Scraper

2 working ends with knurled handle in center OAL: 9" / 23cm Double Pointed Scriber MADE IN USA

For parts washing sinks with circulating solvent systems Features Trialoy® double-duty filaments, heavy-duty grooved handle and 28" / 71cm long ru...

Steel racks with 16 slide-on clips hold sockets tightly Includes mounting holes OAL: 17" / 43cm Size: 1/2" Drive MADE IN USA

Size: 10mm - 2-1/4" long x 1/2" drive For tight applications Applications Make Model Year Audi 100 ...

Size: 6mm - 2" long x 3/8" drive For tight applications Components Applications Make Model Year Volkswagen Beetle 1950-2015 Volksw...

Stubby 12-Point Triple Square "XZN" Used for tight access applications Application Guide: #8511 - Various applications on European vehicles. #8...

Remove parts with tapped holes with 81/4" (210mm) yoke and 115/8" (300mm) long forcing screw Puller spreads from 2" to 7 3/4" (50mm to 200mm)

Pull parts with two tapped holes, including gears, fan pulleys, balancers, and cam gears Cross-arm is 1" (25mm) square and 5" (127mm) long, with 5...

Remove bearings, gears, bushings, seals, grease retainers, etc. Includes 4 jaw assemblies for internal/external and 2/3 jaw pulling 3 jaw range: 1...

Remove generator gears, bearings, bearing cones and similar parts where ordinary puller jaws will not reach Services Heavy Duty applications Knife...