General Service

4" / 102mm long for deep-reach applications 2-piece construction for high torque applications 3/8" drive Size: 5mm MADE IN USA

"Star" Plus socket services elliptical shaped fasteners found on many vehicle Standard "Star" or Ribe designs will not fit these fasteners Black f...

"Star" Plus socket services elliptical shaped fasteners found on many vehicle Standard "Star" or Ribe designs will not fit these fasteners Black f...

"Star" Plus socket services elliptical shaped fasteners found on many vehicle Standard "Star" or Ribe designs will not fit these fasteners Black f...

120mm long socket for extra-deep reach 3/8" Drive 6 Point 16mm 21.65mm OD (excluding Drive Diameter)

Sizes: M0, M1, M2, M3, M4, all 3/8" square drive, all packed on socket rail Bits have asymmetrical geometry that provides enhanced installation of...

For use in tight spaces 3.5" (90mm) long hardened jaws Adjust from 1.2" - 3.5" (30mm - 90mm) Thin Jaw Bearing Remover

Sharp dental style picks, with various angles, get into tight places OAL: 6-1/2" / 16.5cm 4 Pc. Dental Pick Set

For separating wires, removing small fuses, "O" rings, retrieving washers and parts, scribing on metal parts High carbon steel points screw into...

Size: 10mm - 2-1/4" long x 1/2" drive For tight applications Applications Make Model Year Audi 100 ...

Size: 8mm - 2" long x 3/8" drive Applications: door hinge on late model Volkswagen Applications Make Model Yea...

Remove parts with tapped holes with 81/4" (210mm) yoke and 115/8" (300mm) long forcing screw Puller spreads from 2" to 7 3/4" (50mm to 200mm)

Similar to #8075 but extra long 20-1/2" (521mm) for added reach Range: 1/2" to 2" (13mm to 50mm) Instructions Outside Pulling: Using the nuts an...

For inside pulling jobs, jaws will remove flywheel pilot and other bearings Range: 1/2" to 1-1/2" (13mm to 38mm) Replacement Jaws: 8070x06 - Stan...

Remove generator gears, bearings, bearing cones and similar parts where ordinary puller jaws will not reach Services Heavy Duty applications Knife...

Remove generator gears, bearings, bearing cones and similar parts where ordinary puller jaws will not reach Knife-like edges minimize damage to pa...

Spread: 17" (432mm) Reach: 15" (381mm) Screw Length: 13" (330mm) Capacity: 13 tons (11.8MT) Instructions Hook the jaws to the desired gear, compo...

Spread: 10" (254mm) Reach: 5-1/2" (140mm) Screw Length: 9" (229mm) Capacity: 7 tons (6.4MT) Thread size: 9/16" (14mm) 20 Threads per inch Instruc...

Spread: 9" (229mm) Reach: 5-1/2" (140mm) Screw Length: 9" (229mm) Capacity: 7 tons (6.4MT) Instructions Hook the jaws to the desired gear, compon...

Spread: 6" (152mm) Reach: 3-1/2" (89mm) Screw Length: 7" (178mm) Capacity: 5 tons (4.5MT) Instructions Hook the jaws to the desired gear, compone...

Two yoke sizes and 4 sets of side screws for all types of pulling jobs Use for Gears, Harmonic Balancers, Pulleys, Steering Wheels, and more! Also...

Allows fast and clean filling of DEF (Diesel Exhaust Fluid), also known as Ad Blue Features: Special threaded connector to fit all standard DEF s...

High quality steel blades with 4 different patterns for removal & installation of O-Rings, Oil Seals & more Tips are angled for hard-to-...

New & Improved design for a wider range of applications! Designed for BMW models where hood needs to be raised higher for proper & safe ...

Spring Loaded clamping action allows easy plugging of small holes when using a MIG welder Copper alloy backing plate prevents burn through Weld wi...

Heavy Duty design Special bend to clear door panels Removes hinge pins on GM vehicles with removable hinge pins Includes Pin Puller to remove ...

Use for turning or adjusting various types of fasteners that have holes or notches on their outer surface Includes 4 pairs of interchangeable 2-si...

Double flares soft steel tubing up to .040" / 1mm wall thickness Single flares soft copper, metal, and tubing Sizes: 3/16, 1/4, 5/16, 3/8 and 1/2"

Used for upholstery work on most vehicles Two types will services all "hog ring" fasteners Spring loaded with cushion grips

Removes shellacked gaskets, paint, grease and carbon 1" wide forged alloy steel blade with chisel edge Can be re-sharpened OAL: 9-3/4" (25cm)

• Torx Plus® TP60 Long Socket is used for wheel hub and bearing service, flywheel bolt removal, and rear wheel bearing bolts with ABS clearance on ...

Pro-grade conical eraser wheel designed for removing pinstripes, decals, vinyl, and adhesive from tight or curved surfaces like bumpers, wheel wel...

Compact, durable tool designed for tight access and precise prying 5 inches long Slim tapered end and an ultra-thin tip (<0.0218”) for slipping...

Large Bright Orange Caliper Hangers Hold larger 6 piston brake calipers out of the way while servicing other components in the wheel well         ...

Complete kit for removing frozen or stuck diesel fuel injectors without damaging electrical components Includes: 7808 Universal Injector Puller Ki...

• Includes bearing separator, yoke, extensions, and wiper arm puller for a wide range of mechanical and automotive applications• Ideal for removing...