Engine Service

This Cam Phaser Holding Tool is designed to be used on Ford engines to lock cam sprockets and torque bolts Services: Ford 4.6L 3v V8 & 5.4L 3v...

Use to install the piston pin circlip on the 986 / 987.1 & 996 / 997.1 Found in P/N: 5018 - Porsche Cam Alignment Tool Kit & 7089 - Porsch...

Use for aligning the camshaft timing angle to correct position Services Mercedes Benz (60°) V6 engine from 2011-2019 Compare to Mercedes Benz Fact...

Porsche Camshaft Tool Kit - 911 & 914/916. Porsche Camshaft Tool Kit includes: 3762 - Porsche Cam Turning Wrench - 911 & 914/916 - Porsch...

Porsche Camshaft Nut Wrench is used for loosening and tightening the camshaft nut The crowfoot design socket is a 46mm with a ½” square drive Appl...

Use for holding the crankshaft for service Services: B38 (1.2L & 1.5L), B48 (2.0L) & B58 (3.0L) engines, 2015+ Application: BMW 340i, 440i...

Use for disassembly of counterbalance shaft gears Pressed on gear can only be removed with this tool Use with standard open-end 24mm hex wrench Se...

Sanding Papers Diameter 16mm (Set of 10)

Thread Repair Tap M10 x 100

Puller Support + Puller M4

17mm Offset Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

Lock Pin - Thin Compare to Ford Factory Tool 303-507 Applications Make Model Engine Years Ford Escape 2.3L DOHC 4V I4 2005-2012 Ford Fusio...

Services the left & right head for 2006+ 3.0L & 3.6L V6 & 2004+ 2.8L I4, 3.5L I5 & 4.2L I6 GM Atlas engines Prevents rotation duri...

Removes crank bolt on Mercedes Benz - M112, M113, M137, M156*, M275 & M285 Services: C240, C280, C320, C43 AMG, CL55 AMG, CLK320, CLK55 AMG, E...

Used for holding the crankshaft & camshafts when removing & installing timing components Sets the engine in the proper position in order t...

Holds camshaft in position during valve timing adjustment Services Porsche 996 Turbo Use in conjunction with CTA 3886 Compare to Porsche Factory T...

Tool kit is designed to service the engine timing system on Porsche 986, 987.1, 996, & 997.1 models The entire kit comes packed in a custom b...

Rotates camshaft for adjusting the engine timing or tightening the timing chain Applications: Audi A6, A7 & A8 equipped with the V8 4.0L TFS...

Holds the camshaft phaser while performing the loosening and tightening of the Oil Control Valves during service procedures on the 3.6L Pentastar ...

For servicing the Camshafts and the Timing Chain during Installation & Removal on Mercedes Benz (3.0L CDi Diesel engine) Included in kit: 10...

Required for proper installation of the Micro-V Stretch Belt on the A/C and Alternator Drive Avoid damage to the belt, A/C and Alternator Drive Se...

Services the left & right head for "High Feature" 2006+ 2.8L, 3.0L & 3.6L V6 GM engines Prevents rotation during timing chain service Ind...

Spring-loaded design for setting pins in variable positions Grooved pins hold the camshaft pulley stationary while loosening and tightening the ce...

Crankshaft socket slips over crank snout Enables engine builder to rotate a complete engine with any 1/2" ratchet or breaker bar Designed to allow...

4-point design for holding the crankshaft pulley Comfort Grip Handle Applications include: Forester 2.0 (2005-2011) Impreza 1.6 / 2.0 (2005-2008)...

Services belts on Volvo & BMW Heavy-duty long bar with T60 Torx Bit on one end & T50 Torx Bit on other end, plus 16mm x 12-point opening b...

Used for installing serpentine belts for A/C compressors on N62 engines which are not equipped with automatic belt tensioners Some N62 powered car...

A must for removing and installing serpentine belts with spring-loaded idler pulleys 23” long slender design provides proper reach and prevents ...

Set of three wedges designed to hold/wedge while performing timing service Use on Sigma platform engines, 1.4L & 1.6L Duratec 16V engines from...

Fits into the idler pulley and turns it to release tension for replacement of the serpentine belt 3/4" square head Applications 850 (1993-1997)...

Rotates & holds intake camshaft during timing chain service on TFSI engines 3/8" square drive Compare to Factory Tool #T10567 & #40266 Ap...

All the tools needed to service '09 & up models with turbo engines - TFSI Includes crank counter hold tool, crankshaft thrust piece, (4) drift...

Services BMW: M21, M40, M41, M42, M43, M43TU, M44, M47, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57TU, M60, M62, M62TU, M70, M73, S50B30, S50B...