Engine Service

Kit contains everything required to perform timing service on 3.5L EcoBoost engines It also services some 3.5L Duratec (non-turbo), 2.7L & 3.7...

Use for easily removing stuck injectors Perfectly weighted slide hammer for injector extraction Services: Ford EcoBoost GDI engines (1.0L, 2.0L &a...

Tap Support + Tap M3

Services free-wheel pulleys found on VW, Audi, Volvo, Mercedes Benz, Porsche, etc. with Bosch Alternators Features two-part design - 33 spline end...

Tap Support + Tap M4

Keeps the camshafts in position to prevent incorrect timing Use while changing the timing belt to reduce service time and prevents damage ...

Use this camshaft alignment tool on the upgraded 3.5L Ford EcoBoost engine Applications: Expedition (2018-2019), F-150 (2017-2019), Ford G...

Cam Phaser & Timing Chain Locking / Holding Set for 3.0L, 3.2L & 3.6L VVT Pentastar engines Includes 2 camshaft phaser holders and 3 timin...

The crank position sensor (CPS) alignment block used for servicing the alignment of the Crank Sensor on many versions of the 2.0L & 2.3L Ford ...

Services Ford EcoBoost B-Max 1.6L engines Use in conjunction with #1026 Comparable to Ford Factory Tool 303-1550 Applications Make Model Engin...

For use with #2865, 2867 & 2869 Camshaft Holders to lock the crankshaft at TDC Comparable to OEM #T40026 Application Details Make M...

Fits both older 15mm and newer 12mm turbocharger bolts on Cummins ISB 5.9L and 6.7L Turbo Diesel Engines 1/2 In Square Drive Durable construction ...

For VVL (Variable Valve Lift) only, do not use on VVT (Variable Valve Timing) engines Services newer Dodge/Chrysler/Jeep models with Pent...

Used to remove and install the intake manifold of a 2.0L 4V Turbocharged common rail TDI engine 10mm Triple Square (XZN) Ball End Applications: 20...

1.5D Honda Head repair Inserts (5 Pc.) Longer thread inserts for maximum thread engagement Threads specifically designed for Honda, T...

Removes and installs 22mm Oxygen Sensors that cannot be accessed with standard sockets 1/2" square drive & 1" hex drive OAL: 31/2”...

Mercedes Benz M157, M276 & M278 timing tool set Designed to align the camshaft timing angle for correct position Also, for removing injectors ...

Drill Support + Drill 3.2mm

Use for aligning & holding the cams for timing chain service Pins insert into camshaft pulse plates and locks the cams in place ...

Tool is used for holding the Crankshaft Damper on 2005-2011 Ford 2.0L, 2.3L & 2.5L engines Applications: Fusion, Focus, Transit, Milan, MKZ, E...

Properly setup and service engine timing Tool locks the timing chains against the hydraulic tensioners to prevent tensioner ratcheting and pisto...

Subaru (FA & FB Engine) Crankshaft socket slips over crank snout Enables engine builder to rotate a complete engine with any 1/2" ratchet or b...

4-point design for secure and easy removal and installation of the crankshaft pulley Comfort Grip Handle for better control and reduced hand fatig...

For removal and installation of the magnetic actuator Services B38 & B48 engine (1.5L & 2.0L) Compare to BMW Factory Tool #83302360895 or ...

Used for turning the crankshaft pulley Working End: 22mm square drive with 12mm rotating pivot pin Drive: Dual 1/2" Square drive & 24mm ...

140mm long wrench with T60 Torx® end features machined shaft to allow proper clearance to service Dual Mass Flywheel Mount Bolts, as they are off-...

Installs the front seal and wear ring on the crankshaft for 6.4L Ford Powerstroke Designed to eliminate lip flare on the wear sleeve and installs ...

Secure flywheel fastening and release during vibration damper screw connection tasks Ensure safe and effective flywheel securing while working on ...

M6 x 100 Puller

Lock Pin - Thick Compare to Ford Factory Tool 303-748 Applications Make Model Engine Years Ford Fiesta 1.25L Duratec 2005-2008 Ford Fiesta...

Compresses belt tensioner spring when replacing the engine drive belt and alternator Services GM 2.4L EcoTec (Hybrid) 2011-2016; Buick Regal, LaCr...

Tool holds the camshaft at T.D.C. to ensure proper timing when performing service on timing system components (cams, gears, chains, etc.) Designed...

Sets & adjusts timing on '98 - '07 VW TDi engines Engine: 1.9L & 2.0L TDi Includes: Lock Pins Cam Lock Bar ...

Bracket is used to hold a GM 1.5L engine Bracket is installed onto both camshafts, and holds the assembled hex on both cams to maintain their rela...