Engine Service

Cam Phaser & Timing Chain Locking / Holding Set for 3.6L Pentastar engines Services 2016 and newer Chrysler, Dodge & Jeep models Compare t...

Kit contains everything required to perform timing service on 4.6L, 5.4L and 6.8L Ford Triton engines This comprehensive kit includes the followin...

Removes later style central valve on BMW Vanos Hubs and Ford VCTs Services BMW/MINI B36 (1.5L), B38 (1.2L & 1.5L), B48 (2.0L), B58 (3.0L) &...

Use for locking the cams and crankshaft when replacing the timing chain and cylinder head gasket on the Porsche second gen V6 twin turbo engines A...

Cam Phaser & Timing Chain Locking / Holding Set for 3.0L, 3.2L & 3.6L VVT Pentastar engines Includes 2 camshaft phaser holders and 3 timin...

Includes camshaft holding fixtures & chain tensioner hold down pin Services: Ford EcoBoost V6 engines Engine: 2.7L, 3.5L & 3.7L V6 Compon...

Removes and installs water pump pulley on Ford, Lincoln and Mercury 3.0L DOHC engines Includes: Forcing screw with shaft protector Pulley removal...

Cam Phaser & Timing Chain Locking / Holding kit for 3.0L, 3.2L, 3.6L VVT & VVL Pentastar engines Includes 2 camshaft phaser holders, 5 tim...

For VVL (Variable Valve Lift) only, do not use on VVT (Variable Valve Timing) engines Services newer Dodge/Chrysler/Jeep models with Pent...

Subaru (FA & FB Engine) Crankshaft socket slips over crank snout Enables engine builder to rotate a complete engine with any 1/2" ratchet or b...

Counter-weighted design for high torque applications, including: Mercedes Benz (Can be used with CTA 3998 for Benz Applications) Nissan/Infinit...

17mm by 12-point flare nut and deep crowfoot socket allows technician to remove hard-to-reach injector lines on Ford 6.7L Power Stroke application...

Compresses belt tensioner spring when replacing the engine drive belt and alternator Services GM 2.4L EcoTec (Hybrid) 2011-2016; Buick Regal, LaCr...

For removal & installation of 4/3-way central valve for camshaft adjustment Services 2.0L (4v) generation 1, 2 & 3 TFSI engine with chain ...

Tool kit is used to install the piston pin circlip on Porsche engines Includes:  5018X05 - Pin Driver & Extension 5018X06 - Alignment tool A...

Used for adjusting the camshafts when performing service on the timing system Also found in CTA No. 7066 Volvo Camshaft Alignment Kit Compare to V...

Vibration Damper Counter Holder for Porsche 970 & 92A Used to counter hold the crankshaft pulley during removal and installation Used for repl...

Designed to fit the flex plate teeth Insert the tool into the flywheel housing until it engages the ring gear Use with a 1/2" square drive tool (r...

Counter-weighted design for high torque applications, including: Honda engines with 19mm hex pulley damper bolt. Toyota engines with 19mm hex ...

2-part splined wrench required for removal and replacement of free-wheel drive pulleys found on Mercedes Benz alternators T50 Torx bit en...

140mm long wrench with T60 Torx® end features machined shaft to allow proper clearance to service Dual Mass Flywheel Mount Bolts, as they are off-...

The timing tool set includes the tools required to properly service GM Atlas/Vortec engine family Kit includes: 7459 - GM Lower Timing Gear Retai...

Comprehensive kit includes required components to perform complete timing service Services Porsche 911 Turbo & GT2 996 (1997-2006) & 997.1...

Holds the engine when replacing the timing belt Aligning the camshaft and crankshaft position Services vehicles with the "VEA" 2.0L turbocharged a...

Tool kit is used to setup and service the engine timing on Porsche 4.8L V8, 3.0L Supercharged V6 & 3.6L V6 A properly working timing system al...

For removal and installation of the magnetic actuator Services B38 & B48 engine (1.5L & 2.0L) Compare to BMW Factory tool #2 0360 895 App...

Designed for locking the crankshaft and camshafts For correctly setting the timing position while servicing BMW B36, B38, B46 & B48 engines (1...

Splits and reconnects single & double row timing chains on Benz gas and diesel engines Also services some Saab & BMW vehicles Provides cle...

All the tools needed to service '09 & up models with turbo engines - TFSI Includes crank counter hold tool, crankshaft thrust piece, (4) drift...

Services 2006 - 2009 VW / Audi 2.0L Turbo engines Comparable to OEM #T10252 Application Details Make Model Trim Engine Year Audi A3 B...

Adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tension adjustment ...

2-pin wrench adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tensio...

2-pin wrench adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tension ...

Use for timing service on BMW, MINI & Toyota (Supra) B38, B48 & B58 engine variants Locking camshafts and crankshaft, adjusting the camsha...

Specially designed to position the camshafts in TDC position Slackens and tightens the bolts attached to the camshaft gears Services: Mercedes-Ben...

Installer is designed to eliminate lip-flare on the wear sleeve, which can cause oil leaks during install Properly installs the seal, which helps ...

This comprehensive kit contains all the essential tools for servicing the crankshaft front and rear seals on Ford Powerstroke diesel engines Inclu...

For timing BMW N47, N47S 2.0L and N57 3.0L diesel engines Services: 1, 3, 5 Series, X3 from 2007-2015 Includes cam setting plate, flywheel pin, cr...

Socket is used for turning the camshafts during engine timing service Services: M133, M176, M178, M264, M270 & M274 engines Use with ½” square...

Use to install and remove the camshaft adjusters Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy ...

Use to install and remove the camshaft adjusters  Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy...

Use to install and remove the camshaft adjusters Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy ...

Use to install and remove the camshaft adjusters Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy ...

Master kit includes all timing tools required to set cams, valves & VANOS timing on BMW N51, N52, N53, N54 & N55 engines Incudes camshaft ...

Use to install the piston pin circlip on the 986 / 987.1 & 996 / 997.1 Found in P/N: 5018 - Porsche Cam Alignment Tool Kit & 7089 - Porsch...

Use for aligning the camshaft to TDC (Top Dead Center) Applications: 2014+ Mercedes Benz AMG C63, E63, S63, GT and GT-S with biturbo 4.0L V8 engin...

Puller component from #1094 Benz CDI Common Rail Injector Puller Kit U-Bracket design

Required to hold the flywheel in a secure position while servicing the balancer retaining bolt This tool allows for securing the flywheel by utili...