Engine Service

Features vacuum cup & hardwood handle. Two working ends on tool for maximum coverage Large: 1-1/8" x 1-3/8"

Removes and installs 22mm Oxygen Sensors that cannot be accessed with standard sockets 1/2" square drive & 1" hex drive OAL: 31/2”...

Allows valve spring and stem seal replacement without cylinder head removal Includes multiple adapter sizes for different valve spring diameters ...

Installs harmonic balancer or drive pulleys that are pressed on the camshaft Includes 12 adapters: M16-2.0 M16-1.5 M14-2.0 M14- 1.5 M12-1.75 M12-...

Sockets are designed to install and remove Exhaust Gas Temperature sensors on cars & trucks without damaging connection wire, housing, sensor ...

Spring-loaded design for setting pins in variable positions Grooved pins hold the camshaft pulley stationary while loosening and tightening the ce...

A must for removing and installing serpentine belts with spring-loaded idler pulleys 23” long slender design provides proper reach and prevents ...

Application: Cars/Light Trucks Depth: 4" (100mm) Range: 53 - 175mm Features ratchet mechanism with square drive tools to adjust di...

Application: Passenger Cars Depth: 3" (75mm) Range: 60 - 175mm Features ratchet mechanism with square drive tools to adjust diameter, enlarged cri...

Service head bolts on many VWs and Audis 1/2" square drive and 4-1/4" (10.7cm) long for deep-reach applications Ribe wrenches will also service...

Installs and removes piston rings without damaging Spring loaded Range: 2-1/2 - 6-1/4" (64 - 159mm)

Removes corrosion and straightens damaged threads in Oxygen Sensor holes M18 x 1.5 size can also be used on same size Spark Plug threads Use wi...

Extended crowfoot design allows access to oxygen sensors that are located in the exhaust manifolds Full slot accommodates connectors on heated oxy...

Used for servicing a wide range of 22mm oxygen sensors Included are 3 of the most popular versions of the 22mm socket: #2062 - Narrow Slot Oxygen...

Features vacuum cup & hardwood handles Two working ends on each tool for maximum coverage Large: 1-1/8" x 1-3/8" Small: 5/8" x 13/16"

Use to remove and install the snap-ring on the long reverse piston and return spring, without removing the center shaft and clutch assembly from t...

The offset jaws will grip the valve spring in parallel compression with no need to remove the head. The jaws are extra long for use on high perf...

Removes lifters that are not baked in or stuck without removing manifold Heat-treated teeth hook under groove OAL: 13" (33.5cm) Di...

Hardened steel tips allow for easy seal removal OAL: 10" (25cm)

For fast overhead valve repairs without removing cylinder head Fit 14 & 18mm spark plug holes Accepts 1/4" air hose coupling

Installs piston rings from 27/8 to 43/8" (73-111mm) Includes ratcheting pliers and 6 sizes of 11/2" wide compressor bands Works either parallel or...

Removes pressed-on 1 or 2 groove pulleys from alternators and power steering pumps without damage Fits both large and small pulleys found on old...

7/8” (22mm) hex socket with narrow slot for extra strength Combination 3/8" square drive & 1" hex drive Nickel plated