Engine Service

This Cam Phaser Holding Tool is designed to be used on Ford engines to lock cam sprockets and torque bolts Services: Ford 4.6L 3v V8 & 5.4L 3v...

Required for proper installation of the Micro-V Stretch Belt on the A/C and Alternator Drive Avoid damage to the belt, A/C and Alternator Drive Se...

Spring-loaded design for setting pins in variable positions Grooved pins hold the camshaft pulley stationary while loosening and tightening the ce...

A must for removing and installing serpentine belts with spring-loaded idler pulleys 23” long slender design provides proper reach and prevents ...

Set of three wedges designed to hold/wedge while performing timing service Use on Sigma platform engines, 1.4L & 1.6L Duratec 16V engines from...

Primarily services Ford 4.0L SOHC V6's And some late model 4.6L V8's 3 pieces with detachable end to enable access in tight areas Compare to Ford ...

Services Ford vehicles w/ 4.6L, 5.4L & 6.8L 3V engine Compare to Ford Factory Tool 303-1039 Instructions 1. Install 2-leg main body below th...

Counter-weighted design for high torque applications, including: 21mm hex pulley damper bolts on Chevy, Chrysler, Dodge, Ford, GM, Jeep and Mazd...

Used to install Harmonic Balancers on V8s and V6s on '04 - current Ford*, '08 - current GM**, & '06-current Chrysler/Dodge*** Reduces risk of...

Kit includes tools for timing and camshaft service on Ford 2.7L, 3.0L & 3.5L EcoBoost engines Provides a complete solution for camshaft alignm...

This comprehensive kit contains all the essential tools for servicing the crankshaft front and rear seals on Ford Powerstroke diesel engines Inclu...

Kit includes both the Camshaft (7640X01) and Crankshaft (5050) holding brackets Designed to position and hold the camshaft and crankshaft on 1993-...

Designed to position and hold the crankshaft when installing timing chains Applications: 1993-2004 Ford 4.2L 2 valve, 4.6L 4-valve, 5.4L V8, and 6...

One tool locks camshaft and the other locks the timing chain Services Ford 4.6L, 5.4L & 6.8L 3V engines Also includes #7639 Ford Valve Spring ...

One tool locks camshaft and the other locks the timing chain Services Ford 4.6L, 5.4L & 6.8L 3V engines Comparable to Ford Factory Tools #5676...

Quickly and easily install stretch belts found on many late model vehicles These drive systems do not have a tensioner and require the proper inst...

Use to remove and install Fan Clutch Assemblies when replacing Water Pumps or doing other Engine Services Size: 36 x 48mm ( 17/8" x 17/16" ) Appli...

Installs Oil Rail Ball Tubes in Oil Manifolds found on 2004.5 - 2007 Powerstroke 6.0L engines Also works as alignment tool Size: 22.75mm hex w...

Use to remove and install the snap-ring on the long reverse piston and return spring, without removing the center shaft and clutch assembly from t...

Primes the lubricating system of new and rebuilt engines, sending oil to the internal moving parts before the first start Use with 3/8" o...

Safely removes fuel injectors from Ford EcoBoost engines while preventing damage to the injector’s plastic housing ring    Services: 1.0L, 2.3L, ...

Designed for locking the cam gears in place during timing belt service to ensure accurate alignment Services: 2019+ Ford and Lincoln vehicles with...

Holds camshafts in position to maintain proper timing during service and repair Simplifies camshaft and timing chain service, reducing service tim...

Removes the front seal and wear ring from crankshaft Includes: Crankshaft Front Seal and Wear Ring Remover Services: Ford F-250, F350, F450, F-550...

Removes the front seal and wear ring from crankshaft on PowerStroke engine Services: 2003-2007 F-250, F350, F-450, F-550, Excursion / 2004-2007 F-...

Remover is designed to quickly and easily remove the seal and wear ring without damaging the crankshaft The Crankshaft Rear Seal Wear Ring Remover...

For alignment on 2010 & up Ford 2.0L engines Cam locking plate with special milled thickness Retaining bolt included Compare to Ford Factory T...

Kit includes timing and seal service tools for services on the 1.6L Ecoboost engine. Components included in kit: #2822 - Ford Cam Locking Plate ...

Comprehensive tool kit services Ford, Lincoln, Land Rover & Mazda 1.4L, 1.5L, 1.6L, 2.0L, 2.3L, 2.5L & 3.0L engines Used on EcoBoost, Dur...

Services Ford and Volvo 1.5L & 1.6L Engines Forged construction Use with CTA #2880 Compare to Ford Factory Tool: #303-1097 Click HERE for in...

Tool is used for Compressing valve springs on the 3.0L without having to remove the head Applications: Fusion, Milan, MKZ, Escape, Mariner, Five H...

Counter-weighted design for high torque applications OAL: 89mm Use with 1/2" square drive tools Includes 3 metric sizes: 1064 - 17mm - Honda, ...

Use with 3/4" drive tools to transmit high toque needed to losen and tighten head bolts Allows access to rear head bolts by eliminating t...

Primes the lubricating system of new and rebuilt engines, sending oil to the internal moving parts before the first start Use with 3/8" o...

Two part splined wrench is required for removal and replacement of free-wheel drive pulleys found on Bosch Alternators 10mm x 12 point end locks a...