Black Friday

Extracts broken dipstick tubes, a common issue on Dodge 5.7L & 6.1L HEMI Engines during engine service When the dipstick tube breaks off, a pi...

This tool is part of CTA #4380 Spare Tire Tool Kit Use for removal & installation of spare tires mounted under vehicle Working end - 5/8" H...

Services most steering wheels, including telescopic tilt columns Includes: 4 sets of cap screws 2 yokes Metric & SAE lock plate adapters and ...

Extracts broken dipstick tubes, a common issue on Dodge 5.7L & 6.1L HEMI Engines during engine service When the dipstick tube breaks off, a pi...

Includes set of camshaft holders plus crankshaft pulley install/removal/turning tool All steel precision-machined construction Packed in blow mold...

3” long socket installs and removes Oil Pressure Switches up to 25/8” long found on some older GM and Chrysler vehicles Use with 3/8” square dri...

Cleans injector seat and hole prior to installing new injector Cleaning seat & hole is a crucial step in the installation process Reduces chan...

Adapter 1/2 Turn Thread Color: Bright Green Included in kit #7333 O.D. of working end: 34.50mm Applications Make Model Year Dodge 5.7L ...

Installs Factory front seal #3937111, #3904353 and the seal found in kit #3802820 Note: CTA #5046 is required if the seal has a wear sleeve Appli...

Remove housings with cartridge-type oil & fuel filters Chrome vanadium steel 3/8" square drive 24mm Application Details ATTENTION! NEW APPL...

Holds Harmonic Balancer in place when removing or installing center bolt of Ford Taurus Pulley Extension Tool can be used to turn the engine to ga...

For removing and installing front hub/axle nuts 1/2" square drive Size: 32mm Point: 6

For removing and installing front hub/axle nuts 1/2" square drive Size: 30mm Point: 6 Safe for Impact usage

For loosening tension on timing chains during camshaft service procedures Compare to FCA Group Factory Tool #’s 10200A & 10200-A Material: Dur...

Removes the locking ring on top of the tank Prevents damage to the plastic lock ring for fuel pump service 1/2" Drive Dimensions Overall L 7.25 i...

This tool is part of CTA #4380 Spare Tire Tool Kit Use for removal & installation of spare tires mounted under vehicle Working end - Slotte...

Applications: Ford Ranger & Bronco II w/ manual hubs (1984-1992) Ford F-series 1/2 ton truck and full-size Bronco w/ D...

1/2" square drive Applications: Ford Ranger, Bronco II & Explorer w/ manual hubs (1993+) Ford F-series 1/2, 3/4 &...

Remove and install screw-in type ball joints 3/4" drive Size: 2-9/64" Applications: Light trucks and vans

Using this special cable, record the noise from a wireless electric stethoscope on any smartphone while listening live on a Wireless Electronic St...

This Funnel kit combines the necessary tools used for servicing Nissan Includes: 7471 - Oil Filling Funnel 7469 - Oil Collector & Funnel Stan...

This Funnel kit combines the necessary tools used for servicing Chrysler, Dodge, & Jeep Includes: 7471 - Oil Filling Funnel 7469 - Oil Collec...

Extra Low-profile (21.15mm height) required for minimal clearance Chrome-vanadium steel for extra strength 3/8” square drive Services Fleetgua...

Used for removing plastic drain plugs found on many late model vehicles Will NOT damage drain plugs Adapter is marked with the #4 for identificati...

Counter-weighted design for high torque applications OAL: 89mm Use with 1/2" square drive tools Includes 3 metric sizes: 1064 - 17mm - Honda, ...

For removing and installing front hub/axle nuts 1/2" square drive Size: 34mm Point: 6

For removing & installing front hub/axle nuts & injectors Size: 30mm Point: 12 1/2" square drive OAL: 78mm / Depth: 50mm Applications: ...

Use to remove and install Fan Clutch Assemblies when replacing Water Pumps or doing other Engine Services Size: 36 x 48mm ( 17/8" x 17/16" ) Appli...

For VVL (Variable Valve Lift) only, do not use on VVT (Variable Valve Timing) engines Services newer Dodge/Chrysler/Jeep models with Pent...

Removes clogged or stuck diesel injector seals. 1 Kg (2.2 lbs) slide hammer removes the most difficult seals. Slide hammer designed with integrate...

Applications: Dodge Trucks w/ Dana 60 Manual Hubs (1990-1993) 1/2" drive tools Size: 2-9/16" Rounded 6-Point

Click here for application chart of clutch tool range Spline Diameter: 1 1/2" Metric Spline: 38.1000 Spline Count: 10 Pilot Diameter: .750 Metric ...

Remove and install screw-in type ball joints 3/4" drive Size: 1-59/64" Applications: Mid-size, rear-wheel drive cars

Valve spring compressor for Jeep, Dodge & Chrysler 3.7L & 4.7L engines Services DR, HB, KA, KJ, KK & ND systems 3/8" drive Applicatio...

For servicing both the Balance Shaft and Crankshaft on a Mercedes M651 (1.8L & 2.1L Turbocharged Diesel engine) Included kit: 1105 - Benz/Jee...

Applications: For injector testing on Case/Cummins "B" Series and Dodge 5.9L (24mm X 1.5) Click 'Application Chart' for full applications!...