Black Friday

Installs harmonic balancer or drive pulleys that are pressed on the camshaft Includes 12 adapters: M16-2.0 M16-1.5 M14-2.0 M14- 1.5 M12-1.75 M12-...

Extracts broken dipstick tubes, a common issue on GM 4.8L, 5.3L, 5.7L, 6.0L & 6.2L Engines during engine service When the dipstick tube breaks...

Male to Female Threaded Adapter used with #5405, #5407 & #5409 to extract dipstick tube, using any standard thread (5/8"-18 TPI) slide hammer ...

Test vehicles with Multi-port fuel injection Features 3-1/2" (90mm) gauge with dual calibration (5-145 PSI / 25-1,000 kPa) Hose with quick disconn...

Use with CTA #7400 Services GM vehicles with 12 x 1.75 threaded end Will work on most "Non-CTA" ATF Filling System Tanks Applicatin...

For replacing fuel filter or servicing the water sensor without damage Services '01 - '11 6.6L Duramax diesel engines (Aftermarket) 6-...

Application: GM / Chrysler Used in conjunction with 7023 to close hole on 2-hole master cylinder Included in 11pc. Master Cylinder Adapter Kit - C...

Services most steering wheels, including telescopic tilt columns Includes: 4 sets of cap screws 2 yokes Metric & SAE lock plate adapters and ...

Separate the hydrocarbon injection quick connect Offset design for improved access and easy use Services: 2010 & up diesel engines, includi...

Used for replacing the Teflon fuel injector seals Services: Subaru 2.0L & 2.4L turbo boxer engines (2014-2019) GM 2.0L & 3.6L engines H...

3” long socket installs and removes Oil Pressure Switches up to 25/8” long found on some older GM and Chrysler vehicles Use with 3/8” square dri...

Set is designed for the L5P Diesel engine with two tank caps One cap is located on the side of the tank (Vented) with right-hand threads The other...

Cleans injector seat and hole prior to installing new injector Cleaning seat & hole is a crucial step in the installation process Reduces chan...

Required to hold the flywheel in a secure position while servicing the balancer retaining bolt This tool allows for securing the flywheel by utili...

Remove housings with cartridge-type oil & fuel filters Chrome vanadium steel 3/8" square drive 24mm Application Details ATTENTION! NEW APPL...

Remove housings with cartridge-type oil & fuel filters Chrome vanadium steel 3/8" square drive 32mm Application Details Make Model Ye...

For removing and installing front hub/axle nuts 1/2" square drive Size: 30mm Point: 6 Safe for Impact usage

For removing and installing front hub/axle nuts 1/2" square drive 27mm X 6 Point

Click here for application chart of clutch tool range Spline Diameter: 2" Metric Spline: 50.8000 Spline Count: 10 Pilot Diameter: 1.180 Metric Pil...

For pressurizing Cooling Systems All metal construction For vehicles with small, deep necks Use with CTA #7050 Pressure Tester Compatible with ot...

Press fit front seal to engine block & crankshaft for proper fitment of inner & outer seal body (works w/ 3878) Services GM/ISUZU...

Removes the locking ring on top of the tank Prevents damage to the plastic lock ring for fuel pump service 1/2" Drive Dimensions Overall L 7.25 i...

Using this special cable, record the noise from a wireless electric stethoscope on any smartphone while listening live on a Wireless Electronic St...

This Funnel kit combines the necessary tools used for servicing GM, Land Rover, Jaguar, & Hyundai Kit Includes: 7471 - Oil Filling Funnel 746...

Keeps the lower timing gear locked while the cylinder head is removed from engine Services I4, I5 & I6 (Atlas) engines Without this tool, the ...

Used for removing plastic drain plugs found on many late model vehicles Will NOT damage drain plugs Adapter is marked with the #1 for identificati...

Counter-weighted design for high torque applications OAL: 89mm Use with 1/2" square drive tools Includes 3 metric sizes: 1064 - 17mm - Honda, ...

Click here for application chart of clutch tool range Spline Diameter: 15/16" Metric Spline: 23.8125 Spline Count: 14 Pilot Diameter: .470 Metric ...

Click here for application chart of clutch tool range Spline Diameter: 1 1/8" Metric Spline: 28.5750 Spline Count: 10 Pilot Diameter: .590 Metric ...

Click here for application chart of clutch tool range Spline Diameter: 1" Metric Spline: 25.4000 Spline Count: 24 Pilot Diameter: .670 Metric Pilo...

For removing and installing front hub/axle nuts 1/2" square drive Size: 34mm Point: 6

For removing and installing front hub/axle nuts 1/2" square drive Size: 29mm Point: 6

To Test Pressure Relief Valve in Cooling System Cap All metal construction with 52mm x 2.5mm Buttress Threads Use with CTA #7050 Pressure Tester ...

Primes the lubricating system of new and rebuilt engines, sending oil to the internal moving parts before the first start Use with 3/8" o...

Removes clogged or stuck diesel injector seals. 1 Kg (2.2 lbs) slide hammer removes the most difficult seals. Slide hammer designed with integrate...

Click here for application chart of clutch tool range Spline Diameter: 1 1/2" Metric Spline: 38.1000 Spline Count: 10 Pilot Diameter: .980 Metric ...