Products

Designed to hold timing marks in place during timing chain replacement on Ford engines Essential for correct timing adjustments, ensuring engine p...

Designed for servicing Mercedes-Benz camshaft adjuster central valves, providing the correct fitment for removal and installation during timing pr...

Designed for precise service of Jeep 2.0L turbocharged (2.0T) engines, this set allows accurate alignment of the camshaft and proper control of ch...

Locks the camshaft in the correct position during timing chain service Prevents cam movement for accurate timing adjustment on Jeep 2.0T engines C...

Holds the timing chain tensioner compressed during removal and installation Ensures consistent chain tension while setting or verifying timing mar...

Used to secure the tensioner in its compressed state for timing work Allows controlled release of tension after camshaft and chain alignment is co...

Set contains 4 bearing splitters and 1 V-Belt Pulley Pulling attachment tool Use to remove bearings, races, and seals from axles, wheel hubs, tran...

Removes injectors using M8 x 1.25 thread and included mini slide hammer Installs Teflon seal with included tapered cone Made of desulphurized carb...

Fits hard-to-raech areas Range: 1/4" to 3/4" / 6mm to 19mm Use with 1/2" drive tools Stud Remover Basic Instructions: Stud Remover Compo...

XZN Triple Square “L” Wrench (12-Point) Used for service on VW, Audi, Porsche, BMW, Volvo, Mercedes-Benz, Detroit Diesel engines and many more! ...

XZN Triple Square “L” Wrenche (12-Point) Used for service on VW, Audi, Porsche, BMW, Volvo, Mercedes-Benz, Detroit Diesel engines and many more!...

XZN Triple Square “L” Wrenche (12-Point) Used for service on VW, Audi, Porsche, BMW, Volvo, Mercedes-Benz, Detroit Diesel engines and many more!...

XZN Triple Square “L” Wrenche (12-Point) Used for service on VW, Audi, Porsche, BMW, Volvo, Mercedes-Benz, Detroit Diesel engines and many more!...

Set of XZN Triple Square “L” Wrenches (12-Point) Used for service on VW, Audi, Porsche, BMW, Volvo, Mercedes-Benz, Detroit Diesel engines and many...

Adapter plate provides threaded anchor points on the front timing chain cover for secure bolt installation            Allows for even separation ...

Designed for installation of the front crankshaft seal on Cummins and Paccar engines   Includes: 1081 – Front Crank Seal Installer (3824499) 660...

Designed for dismantling high-pressure injectors and accessing combustion chamber seals Services Volkswagen and Audi 4-cylinder 1.8L and 2.0L 4V T...

Removes broken studs, set screws, pipes and fittings Hardened extractors are tapered with special 4-point ends to bite into fastener ...

For removal of female style plugs with rounded off inserts Bolt, Stud or Screw Size: 1/4" Pipe Size: 5/16" Drill Size: 1/8"

For removal of female style plugs with rounded off inserts Bolt, Stud or Screw Size: 3/8" Pipe Size: 3/8" Drill Size: 3/16"

For removal of female style plugs with rounded off inserts Bolt, Stud or Screw Size: 7/16" Pipe Size: 1/8" Drill Size: 15/64"

For removal of female style plugs with rounded off inserts Bolt, Stud or Screw Size: 1/2" - 9/16" Pipe Size: 1/4" Drill Size: 5...

For removal of female style plugs with rounded off inserts Bolt, Stud or Screw Size: 5/8" Pipe Size: 3/8" Drill Size: 3/8"

For removal of female style plugs with rounded off inserts 1/2" plugs with 3/8" square hole

For removal of female style plugs with rounded off inserts 3/4" plugs with 1/2" square hole

Removes broken studs, set screws and pipe fittings Chrome- moly steel with reverse tapered threads Includes: #9041, #9042, #9043, #9044, #9045 MAD...

Bolt, Stud or Screw Size: 1/8" - 1/4" Drill Size: 5/64" "Screw Extractor - 1/4" MADE IN USA Instructions: Drill a hole in the broken part, i...

Bolt, Stud or Screw Size: 1/4" - 5/16" Drill Size: 7/64" "Screw Extractor - 5/16" MADE IN USA Instructions: Drill a hole in the broken part,...

Bolt, Stud or Screw Size: 5/16" - 7/16" Drill Size: 5/32" "Screw Extractor - 7/16" MADE IN USA Instructions: Drill a hole in the broken part...

Bolt, Stud or Screw Size: 7/16" - 9/16" Drill Size: 7/32" "Screw Extractor - 9/16" MADE IN USA Instructions: Drill a hole in the broken part...

Bolt, Stud or Screw Size: 9/16" - 3/4" Drill Size: 7/64" Pipe Size: 1/8" - 1/4" "Screw Extractor - 3/4" MADE IN USA Instructions: Drill a h...

Bolt/Stud/Screw Size: .75” to 1” Drill Size: 13/32” Pipe Size: 3/8” Material: Steel Instructions: Drill a hole in the broken part, insert th...

Bolt/Stud/Screw Size: 1” to 1-3/8” Drill Size: 17/32” Pipe Size: ½” Material: Steel Instructions: Drill a hole in the broken part, insert th...

Bends 3/16, 1/4, 5/16, and 3/8" (4.8, 6.4, 7.9, and 9.5mm) O.D. tubing without kinking or collapsing OAL: 8" / 20cm

Use tool to install the rear camshaft seal Services a wide range of Volvo models Compare to Volvo Factory Tool 999 5718-5 Applications - Engine C...

Comparable to Volvo OEM # 999 5718-5 Application List: Engine Codes B4184S10, B4184S2, B4184S3, B4184S9, B4194T2, B4204S2, B4204T2, B4204T2 CVVT, B...