Products

Use for 3.9L, 5.9L & 6.7L Cummins engines when wear sleeve is installed or replaced Services Paccar PX-6, 1989-2016 Cummins 4BT 3.9L, B Series...

Master kit services Rear Wheel Hubs & Bearings on European vehicles, plus Front Wheel Hubs & Bearings on US, Asian & European vehicles...

Master kit services Rear Wheel Hubs & Bearings on European vehicles, plus Front Wheel Hubs & Bearings on US, Asian & European vehicles...

Center Screw Code - "1 or A" Length - 11" (279.4mm) Width - 3/4" (19.05mm) Thread - 9 TPI For Kit 8650 or 8650M

Elongated Nut For Kit 8650 or 8650M

Bracket Assembly (C) For Kit 8650 or 8650M

Horseshoe Adapter (D) 42.3mm Wide End For Kit 8650 or 8650M

Horseshoe Adapter (E) 28mm Wide End For Kit 8650 or 8650M

Horseshoe Adapter (F) 37mm Wide End with Notch For Kit 8650 or 8650M

Spacer 45mm High x 95mm OD (U) For Kit 8650 or 8650M

Support Disc - 9.5mm High x 95mm OD (H) For Kit 8650 or 8650M

Installer Washer (P) 63mm OD For Kit 8650 or 8650M

Installer Washer (Q) 59mm OD For Kit 8650 or 8650M

Installer Washer (J) 66mm OD For Kit 8650 or 8650M

Installer Washer (K) 65.3mm OD For Kit 8650 or 8650M

Installer Washer (L) 73mm OD For Kit 8650 or 8650M

Installer Washer (M) 71.3mm OD For Kit 8650 or 8650M

Adapter Sleeve (T) 17mm High x 95mm OD For Kit 8650 or 8650M

Adapter Sleeve (S) 16.7mm High x 100mm OD For Kit 8650 or 8650M

Adapter Sleeve (R) 20mm High x 109mm OD For Kit 8650 or 8650M

Installer Washer (N) 78mm OD For Kit 8650 or 8650M

Installer Washer (O) 82mm OD For Kit 8650 or 8650M

Extractor Washer (I) 14mm High x 53.4mm OD For Kit 8650 or 8650M

45MM OD Adapter services BMW's with Smaller hub diameters

Designed for R&R of big wheel bearings Service 89mm to 99mm O.D. Use with kit #8650 - Wheel Bearing & Hub R & R Kit Applications...

Use to remove and install the front lower control arm and torque strut bushings Services: Mercedes W203, 204, 209, 211, 215, 220, 221 and 230 ch...

Removes and installs rear axle carrier ball joints in place (no need to drop suspension or subframe) Heavy-duty force screw designed for in-situat...

Bolt Replacement component for #8692

Nut Replacement component for #8692

Hard-to-find bit-sockets to service "Figure 8" screws on old GM cars, trucks & some non-automotive applications Applications include headlight...

Hard-to-find bit-sockets to service "Figure 8" screws on old GM cars, trucks & some non-automotive applications Applications include headlight...

Services belts on Volvo & BMW Heavy-duty long bar with T60 Torx Bit on one end & T50 Torx Bit on other end, plus 16mm x 12-point opening b...

Offset, 14mm x 6 point hex male & 17mm x 6 point wrench end Designed to service the driveline fluids on most BMWs Differential, Transfer Case,...

Service common drain plugs found on VW, Audi & Porsche models Offset ends include 16mm XZN 12-Point w/ Tamperproof hole & 19mm 6-point w...

Removes Haldex Oil Filter Housing on the rear differential found on VW Golf & Audi TT models Features special angled head with 48mm x 12 poi...

Clamp hoses and vacuum lines with special swivel jaws Maintain a parallel clamp Features built-in ratchet mechanism that locks handles...