Products

Lamborghini T80 Torx Bit Socket Used for the removal of Lamborghini Lugs on 1999 and up models Also services BMW E31, E38, & E39 removal and i...

Designed to fit the flex plate teeth Insert the tool into the flywheel housing until it engages the ring gear Use with a 1/2" square drive tool (r...

Used to remove and install the intake manifold of a 2.0L 4V Turbocharged common rail TDI engine 10mm Triple Square (XZN) Ball End Applications:...

Extra slim design Brake Caliper File removes residue, dust, rust and dirt from the caliper Flat file end is used for scraping crude/coarse...

Easily setup and service the Mercedes Benz M156 engine timing while installed A properly working timing system allows the engine’s valves to ope...

Services Mercedes-Benz timing systems for proper extraction of the rail pins from cylinder head, timing covers and engine blocks Set contains: ...

Sockets are designed to install and remove Exhaust Gas Temperature sensors on cars & trucks without damaging connection wire, housing, sensor ...

13mm Offset Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

14mm Offset Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

17mm Offset Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

13mm Straight Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

14mm Straight Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

17mm Straight Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

The 5085 - Cummins Front + Rear Crankshaft Seal Remover + Install Master Kit is designed for removing and installing front and rear crankshaft seal...

Remove all types of automotive plastic fasteners, molding and parts Lightweight but strong, the all-plastic body will not mar or damage interior...

For use on Instrument Panels, Door Thresholds, Interior Trim, Trunk Panels, etc Nylon plastic body will not mar or scratch surfaces 40...

For prying, scraping, fastener removing and more! Plastic design prevents scratching or marring of sensitive surfaces All 7" / 18cm long with h...

Accurately displays the air suspension pressure during service Helps detect leaks and/or irregularities in pressure throughout the air suspension...

Specially designed to position the camshafts in TDC position Slackens and tightens the bolts attached to the camshaft gears Compare to Mercedes Be...

Steel levers are embedded in glass-filled nylon fips for removal of any clip found on trim, bumpers, etc. on most makes and models Tips have spe...

Removes plastic push pins found under hood and in trunk without damage to pins or anchors Features sharpened/hardened jaws and spring-loaded handl...

Remove and install door hinge spring GM Door Spring Compressor

Heavy Duty design Special bend to clear door panels Removes hinge pins on GM vehicles with removable hinge pins Includes Pin Puller to remove ...

Removes wiper arms on all makes and models Works in tight spaces Won't damage wiper arm or paintwork Turning Knob for fast work Forged body f...

Used for upholstery work on most vehicles Two types will services all "hog ring" fasteners Spring loaded with cushion grips

Used for upholstery work on most vehicles Two types will service all "hog ring" fasteners Spring loaded with cushion grips Offset 45o

For the removal and replacement of the main ignition switch retaining ring Ignition equipped on Mercedes Benz Compare to Mercedes Benz factory too...

Subaru (FA & FB Engine) Crankshaft socket slips over crank snout Enables engine builder to rotate a complete engine with any 1/2" ratchet or b...

Use with breaker bar to easily align doors Thick steel construction for durability Compact size for easy storage Instructions Flip the black rev...

Clamps onto lift support to safely keep hood or trunk open while working Anodized aluminum body with plastic handle Lift Support Clamp

9 sets of tools for removing radios on VW, Ford, Audi, Porsche, Mercedes Benz, BMW, Opel and more Also services Blaupunkt, Becker, and Grundig sys...

Male to Female Threaded Adapter used with #5405, #5407 & #5409 to extract dipstick tube, using any standard thread (5/8"-18 TPI) slide hammer ...

Extracts broken dipstick tubes, a common issue on Ford 4.6L, 5.4L, 6.2L & 6.8L Engines during engine service When the dipstick tube breaks off...

Extracts broken dipstick tubes, a common issue on Dodge 5.7L & 6.1L HEMI Engines during engine service When the dipstick tube breaks off, a pi...

Extracts broken dipstick tubes, a common issue on GM 4.8L, 5.3L, 5.7L, 6.0L & 6.2L Engines during engine service When the dipstick tube breaks...