Products

Special angles and tips engage ears for easy removal and replacement of pressed-in locking rings Better than screwdrivers Heavy-duty construction ...

Securely lock and unlock 'Clic' & 'Clic-R' hose clamps. This style of hose clamps offer a variety of benefits including: Clamps are re-usable...

Safest, strongest tool for lock ring service Hold single handle then adjust screw mechanism to control forged jaws to remove and install lock ring...

6 Pc. Replacement Tip Set Includes: 2.5mm (x2) 3mm (x2) 3.5mm (x2)

4.7mm diameter pin set is designed for servicing XL diameter lock rings Use with CTA #4031M Adjustable Lock Ring Pliers Applications: Trucks &...

18 piece expansion set of tips for #4031 Heavy-Duty Lock Ring Pliers Includes sizes 2.5mm (45° & 90°) 3mm (45° & 90°) 3.5mm (45° & 90...

Removes and installs coil springs where removal through the center of the spring is not possible Services both Straight & Curved Coil Springs ...

Compresses the coil spring to replace the shock absorber unit or spring Works on bent struts, strut tubes, and damaged pieces Forged constructions...

Holds torsion bar while making adjustments Services: '88 - '10 GMC Chevrolet 1/2 ton, 3/4 ton and 1 ton pickups S-10 Blazer S-15 Jimmy 4WD pickup...

This crankshaft seal and wear sleeve remover is designed for servicing the front crankshaft seal on 2001 and newer 6.6L Duramax diesel engines. Th...

This rear crankshaft seal remover is designed to remove the rear seal on 2001 and newer 6.6L Duramax diesel engines. Its three jaws grab the inner...

Master kit for servicing the front and rear crankshaft seals on 2001-2016 6.6L Duramax diesel engines Includes: 3878 Rear Crankshaft Seal Install...

Holds torsion bar while making adjustments Services 2011 & up HD & C/K trucks (GM Trucks) Forged construction Bright blue body Click HERE...

Applications: Ford F150 & Bronco with Dana 44 outer locking nut (1981-1997) 1/2" square drive Dimensions: OAL: ...

1/2" square drive Compare to Toyota Factory Tool #09318-12010-SOCK Applications: 4WD Tacomas (1995+) 4WD T100 and 4Runners, all w/lockout hubs ...

Applications: Dodge 1994-2002 w/ 1/2 Ton 4x4 Pick-ups Services: Dana 44 and/or a 60 front axle w/ vacuum disconnect 1/2" drive square drive Size: ...

Services 46mm x 12 point retaining nuts found on many BMW models Similar to BMW Tool #31-2-080 Special Thin Wall Socket OAL: 68mm ...

1/2" square drive Applications: Ford Ranger, Bronco II & Explorer w/ manual hubs (1993+) Ford F-series 1/2, 3/4 &...

Applications: Ford Ranger & Bronco II w/ manual hubs (1984-1992) Ford F-series 1/2 ton truck and full-size Bronco w/ D...

GM 1.6 & 1.8L 16V engine Designed to lock the camshafts in their required timing position Ensure proper alignment of the camshafts Packed in b...

Applications: Ford F-series Heavy-Duty 3/4 & 1 ton Dana 50 IFS or Dana 60 front axle (1985-1995) Ford F-series 1/2 to...

Applications: Ford F250, F350 & F450 Super Duty trucks w/ 10-1/2" rear axle (2003+) 1/2" square drive Compare to Ford Factory Tool #205-282 ...

Applications: 9-pin design fits retaining nut on 2WD and 4WD drive Avalanche, Cheyenne, Escalade, Sierra, and Silverado trucks with...

Applications: Isuzu Trooper, Rodeo, Amigo & pick-ups (1988+) Honda Passport & Jeep J20 pick-ups w/ Dana 60 axle (1989+) Nissan Xterra (...

Applications: Ford F250 & F350 w/ Dana 80 rear axle (1985+ ) Ford E350 w/ Dana 80 rear axle (1987+) Ford F super duty w/ Dana rear axle &...

Applications: Chevy & GMC 5,200 & 7,200 lb axles (1946+) 3/4" square drive Dimensions: OAL: 2-7/8" Depth:...

Applications: Dodge Trucks w/ Dana 60 Manual Hubs (1990-1993) 1/2" drive tools Size: 2-9/16" Rounded 6-Point

Use to easily service ear style clamps on axle boots/hoses Clamps are often difficult to properly tighten and securer without the correct tool Too...

"Flip" Socket offers 2 hex sizes in one socket - 22mm & 24mm Use with 1/2" drive extended shank impact tools with an extension Ser...

17mm x 6-point "Flower Design" impact socket Services '09 & up lug bolts Socket is 85mm long with protective plastic sleeve to prevent scratc...

E24 Torx® Socket Mercedes Benz front Axle Nut Fits special conical style lug bolts Impact grade socket with 1/2" square drive OAL: 2" (50mm) Serv...

Designed to service 19mm lug nuts with missing and distorted chrome caps, found on many Dodge, Chrysler, Jeep, Ford, Lincoln, GM & More ...

Designed to service 22mm lug nuts with missing or distorted chrome caps, found on many Dodge, Chrysler, Jeep & More Chrome capped lug ...