Products

6 Pt. x 7mm Socket - Long 3/8" Square Drive

6 Pt. x 8mm Socket - Short 3/8" Square Drive

6 Pt. x 9mm Socket - Short 1/4" Drive

6 Pt. x 9mm Socket - Long 3/8" Square Drive

12 Pt. x 14mm Socket - Tamper Use for removal of caliper bolts, struts & axle flanges from transmission Services: VW/Audi Applications: 2006-2...

Used for turning the crankshaft pulley Working End: 22mm square drive with 12mm rotating pivot pin Drive: Dual 1/2" Square drive & 24mm ...

Services Audi 4.2L V8 engines Includes: 2872 - TDC Lock Pin Tool (#T40026/T40069) 2879 - Camshaft locking bars (#T40046) 1722 - Audi Se...

Adjusts clearance between brake drum and brake shoe Fits through the slot in the backing plate and turns the star wheel Tools vary by angle and...

Adjusts clearance between brake drum and brake shoe Fits through the slot in the backing plate and turns the star wheel Tools vary by angle and...

Designed for Honda, some Toyota's, etc. (Modifications may be required for applications other than Honda) Thread inserts are longer for maximum en...

1.5D Honda Head repair Inserts (5 Pc.) Longer thread inserts for maximum thread engagement Threads specifically designed for Honda, T...

For accurate measurement of remaining brake lining between the pad and rotor 8 color-coded sizes: Red/Danger - 2 & 3mm Yellow/Warning - 4, 5 ...

Features unique bends that allow easy separation of the brake servo push rod from the brake pedal Engineered for VW/Audi models from 2007 onwards ...

Yoke is designed to safely apply torque on the pinion nut Universal bolt placement design with ½” slots will fit the flange bolt centerlines up to...

Installs Oil Filter Housing Caps and Drain Plugs with 40Nm (29.5 ft-lb) (354 in-lbs) torque specifications Internal torque limiting device prevent...

Molded to the ideal strength and flexibility Dual purpose components offer two working ends for each tool Perfect for prying, scraping, aligning, ...

Use to place and extract cables, connectors and components Reduce the chance of damage to wire insulation Allows the user to push, pull and feed w...

Slim radius taper end for optimum strength and ease of access Overall length: 209.5mm (8.25 inch) High strength thin tip (<0.0187”) Low deflect...

For relining rear disc brakes by rotating pistons back into brake calipers when replacing pads 5 drive pin configurations fit most applications ...

Rotates pistons back into caliper when replacing pads Use with 3/8" square drive tools Compare to Factory Tools #346309 & #346301 Application...

For use with late model VW. Audi and BMW with Electro-mechanical Parking Brakes (EPB) Use with 3/8" square drive tools Compare to Factory Tool #83...

Offset head with special curved ends properly grips washer to allow removal and re-installation of small return springs. Spring loaded to adj...

"Flip" design offers two hex sizes in one socket Half metric sizes for the removal of inflated, warped and mangled chrome-cap style lug nuts found...

Used to remove the roof grab handle of various VW models Without causing damage to clips or headliner Services 2020+ Golf and variants Compare to ...

Helps install pads by compressing inner pad and resetting caliper position Disc Brake Pad Spreader Tool Caliper Piston Compressor Tool

17mm by 12-point flare nut and deep crowfoot socket allows technician to remove hard-to-reach injector lines on Ford 6.7L Power Stroke application...

Flat-face precision fit prevents rounding off flush-mount "Star" bolts Flat-Cut design grabs Low-profile "Star" fasteners regular sockets can't I...

E5 Flat-Cut E-"Star" Socket from 1469 Flat-Cut E-"Star" Socket Set The flat-face precision fit prevents rounding off flush-mount "Star" bolts Slim...

E6 Flat-Cut E-"Star" Socket from 1469 Flat-Cut E-"Star" Socket Set The flat-face precision fit prevents rounding off flush-mount "Star" bolts Slim...

E7 Flat-Cut E-"Star" Socket from 1469 Flat-Cut E-"Star" Socket Set The flat-face precision fit prevents rounding off flush-mount "Star" bolts Slim...

E7 Flat-Cut E-"Star" Socket from 1469 Flat-Cut E-"Star" Socket Set The flat-face precision fit prevents rounding off flush-mount "Star" bolts Slim...

E7 Flat-Cut E-"Star" Socket from 1469 Flat-Cut E-"Star" Socket Set The flat-face precision fit prevents rounding off flush-mount "Star" bolts Slim...

E11 Flat-Cut E-"Star" Socket from 1469 Flat-Cut E-"Star" Socket Set The flat-face precision fit prevents rounding off flush-mount "Star" bolts Sli...

E12 Flat-Cut E-"Star" Socket from 1469 Flat-Cut E-"Star" Socket Set The flat-face precision fit prevents rounding off flush-mount "Star" bolts Sli...