Products

Precision-stamped to remove Aftermarket and OE spin-on filters and filter housings 86mm x 16 Flute Interior Diameter 3/8” square drive Black fi...

Precision-stamped to remove Aftermarket and OE spin-on filters and filter housings 100mm x 15 Flute Interior Diameter 3/8” square drive Black f...

Precision-stamped to remove Aftermarket and OE spin-on filters and filter housings 76mm x 8 Flute Interior Diameter 3/8” square drive Black fin...

Precision-stamped to remove Aftermarket and OE spin-on filters and filter housings, including Amsoil #EA15K20 Size: 76mm x 15 Flute Interior Diame...

Precision-stamped to remove Aftermarket and OE spin-on filters and filter housings 64mm x 14 Flute Interior Diameter 3/8” square drive Black fi...

Precision-stamped to remove Aftermarket and OE spin-on filters and filter housings 88mm x 15 Flute Interior Diameter 3/8” square drive Black fi...

Precision-stamped to remove Aftermarket and OE spin-on filters and filter housings 74.5mm x 14 Flute Interior Diameter 3/8” square drive Black ...

Precision-stamped to remove Aftermarket and OE spin-on filters and filter housings 84mm x 14 Flute Interior Diameter 3/8” square drive Black fi...

For late model Subaru's 65mm x 14 Flute Fits late model Subaru's where other 65mm will not work Precision-stamped 3/8" square drive Black fini...

Speeds valve lash adjustment Install the proper blades for intake and exhaust settings Offset blades for easy insertion Includes two red handles M...

.005 through .020" by thousandths Metric markings included Offset blades for easy insertion on valve tappets and other difficult access applica...

.008, .010, .012, .013, .014, .015, .016, .018, .019, .020, .025, .026" Metric markings included Offset blades for easy insertion on valve tapp...

For long reach applications, especially diesel 12" blades - .0015, .002, .003, .004, .005, .006, .007, .008, .009, .010, .011, .012, .013, .014, ....

3" straight blades - .04, .05, .06, .07, .08, .09, 10, .15, .20, .25, .30, .35, .40, .45, .50, .55, .60, .70, .75, .80, .85, .90, .95, 1.00mm

3" straight blades - .002, .003, .004, .006, .008, .012, .013, .020, .025", plus steel ruler Metric markings included *Technical photo for refere...

3" straight blades - .002, .003, .004, .005, .006, .008, .011, .012, .013, .014, .016, .018, .020, .022, .025", plus steel marking ruler Metric ma...

3" straight blades - .0015, .002, .0025, .003 through .025" by thousandths Metric markings included *Technical photo for reference only

4" straight blades - .0015, .002, .0025, .003 through .026" and .028, .030, .032, .035 and .10" blade Metric markings included *Technical photo f...

1-1/2" blades - .010, .012, .013, .015, .016, .017, .018, .019, .020, .022, .024, .025, .026, .028, .030, .032, .035" Metric markings included *T...

Cleans battery terminals and posts Metal body

One side designed to clean recessed terminals, other side cleans cable bolts and connectors

12" (30cm) strap fits all 6 and 12 volt top terminal batteries Max carry weight 15kg

Set of heavy-duty clamps allows easy repair of jumper cables Copper Plated Steel connectors rated at 400 amps Red = Positive (+) Black =Negative (...

Disconnects the hydraulic clutch line from the clutch slave cylinder

Releases the fitting that connects the heater hose to the engine block and thermostat housing

Scissor-Type Disconnect Tool Services connectors on Fords and Chryslers 3/4”, 5/8”, 1/2” & 3/8”

Release the fitting found on the transmission/radiator oil cooler line Diameter: 13mm or 33/64"

Removes the fuel line from center port of fuel sending unit Sizes: 3/8" 5/16"

Separates tie rod ends from steering knuckles, idler arm and Pitman arms Prevents damage to steering components OAL: 16" (40cm)

Separates ball joints from the steering knuckle making replacement and disassembly of front suspensions easy Prevents damage to suspension...

For removing and installing front hub/axle nuts 1/2" square drive 27mm X 6 Point

For removing and installing front hub/axle nuts 1/2" square drive Size: 33mm Point: 6

For removing and installing front hub/axle nuts 1/2" square drive Size: 30mm Point: 6 Safe for Impact usage

For removing and installing front hub/axle nuts 1/2" square drive Size: 32mm Point: 6

For removing and installing front hub/axle nuts 1/2" square drive Size: 32mm Point: 12 Comparable to OEM # 11 6 462

For removing and installing front hub/axle nuts 1/2" square drive Size: 34mm Point: 6