Products

Used for removing and installing the fuel tank/Fuel pump retaining ring Use on many Late 90’s and early 00’s Volvo models Compare to Volvo Factory...

Extra Low-profile (21.15mm height) required for minimal clearance Chrome-vanadium steel for extra strength 3/8” square drive Services Fleetgua...

Extra Low-profile (21.15mm height) required for minimal clearance Services 6.7L Dodge RAM Cummins fuel filter canister (2010+) & RAM 3.0L EcoD...

Locks camshafts and crankshaft in position when servicing the timing chain and setting engine timing A properly working timing system allows the e...

The turbo system leakage tester helps locate air leaks in the components by plugging the output side of the turbo and plugging the intake inlet Ai...

Removes ignition coils safely and without damage Different design puller heads fit many VW/Audi coil configurations Comfort T-shape handles allows...

Ignition coil puller removal tool prevent coil damage caused by home-made removal methods and prevent injury to hand in tight quarters. Comfort T-...

Ignition coil puller removal tool prevent coil damage caused by home-made removal methods and prevent injury to hand in tight quarters. Comfort T-...

Ignition coil puller removal tool prevent coil damage caused by home-made removal methods and prevent injury to hand in tight quarters. Comfort T-...

Ignition coil puller removal tool prevent coil damage caused by home-made removal methods and prevent injury to hand in tight quarters. Comfort T-...

Master kit includes all timing tools required to set cams, valves & VANOS timing on BMW N51, N52, N53, N54 & N55 (S55) engines Incudes cam...

Complete kit for removing frozen or stuck diesel fuel injectors without damaging electrical components Includes: 7808 Universal Injector Puller Ki...

Easily remove and install the injector pressure regulator in a 2003-2007 6.0L Power Stroke engine Services Ford Injector Pressure Regulator (IPR) ...

Spread: 4" (101mm) Reach: 3-1/2" (89mm) Screw Length: 5" (127mm) Capacity: 2 tons (1.8MT) Instructions Hook the jaws to the desired gear, compone...

Spread: 6" (152mm) Reach: 3-1/2" (89mm) Screw Length: 7" (178mm) Capacity: 5 tons (4.5MT) Instructions Hook the jaws to the desired gear, compone...

Spread: 7" (178mm) Reach: 5-1/2" (140mm) Screw Length: 7" (178mm) Capacity: 5 tons (4.5MT) Instructions Hook the jaws to the desired gear, compon...

Spread: 9" (229mm) Reach: 5-1/2" (140mm) Screw Length: 9" (229mm) Capacity: 7 tons (6.4MT) Instructions Hook the jaws to the desired gear, compon...

Spread: 10" (254mm) 25cm Reach: 9" (229mm) 23cm Screw Length: 9" (229mm) 23cm Capacity: 7 tons (6.4MT) 6364 Kg Instructions Hook the jaws to the ...

Jaw Spread: 15" (381mm) 38cm Jaw Reach: 15" (381mm) 38cm Center Screw Length: 13" (330mm) 33cm Center Screw Diameter: 11/16" Center Screw TPI: 16 ...

Spread: 4" (102mm) Reach: 3-1/2" (89mm) Screw Length: 5" (127mm) Capacity: 2 tons (1.8MT) Thread size: 9/16" (14mm) 20 Threads per inch Instructi...

Spread: 7" (178mm) Reach: 3-1/2" (89mm) Screw Length: 7" (178mm) Capacity: 5 tons (4.5MT) Thread size: 9/16" (14mm) 20 Threads per inch Instructi...

Spread: 10" (254mm) Reach: 5-1/2" (140mm) Screw Length: 9" (229mm) Capacity: 7 tons (6.4MT) Thread size: 9/16" (14mm) 20 Threads per inch Instruc...

Spread: 11" (279mm) 28cm Reach: 9" (229mm) 23cm Screw Length: 9" (229mm) 23cm Capacity: 7 tons (6.4MT) 6364 Kg Instructions Hook the jaws to the ...

Spread: 14" (356mm) Reach: 11" (279mm) Screw Length: 13" (330mm) Capacity: 13 tons (11.8MT) Instructions Hook the jaws to the desired gear, compo...

Spread: 17" (432mm) Reach: 15" (381mm) Screw Length: 13" (330mm) Capacity: 13 tons (11.8MT) Instructions Hook the jaws to the desired gear, compo...

Remove generator gears, bearings, bearing cones and similar parts where ordinary puller jaws will not reach Knife-like edges minimize damage to pa...

Used to remove the roof grab handle of various VW models Without causing damage to clips or headliner Compare to VW Factory Tools #T10517, T10518 ...

Pro-grade conical eraser wheel designed for removing pinstripes, decals, vinyl, and adhesive from tight or curved surfaces like bumpers, wheel wel...

Used for creating slack on the chain tensioner for replacing the timing chain without the need for removing the front cover Necessary for pushin...

Remove generator gears, bearings, bearing cones and similar parts where ordinary puller jaws will not reach Knife-like edges minimize damage to pa...

Removes and installs water pump pulley on Ford, Lincoln and Mercury 3.0L DOHC engines Includes: Forcing screw with shaft protector Pulley removal...

Removes fly wheel pilot bearings and bushings up to 7-1/2" (190mm) long Better than slide hammer type when working in tight areas Better control f...

Installs front and rear crankshaft seals and wear sleeves on Cummins diesel engines Precision-machined installers help ensure proper seal depth, a...

For inside pulling jobs, jaws will remove flywheel pilot and other bearings Range: 1/2" to 1-1/2" (13mm to 38mm) Replacement Jaws: 8070x06 - Stan...

Similar to #8075 but extra long 20-1/2" (521mm) for added reach Range: 1/2" to 2" (13mm to 50mm) Instructions Outside Pulling: Using the nuts an...