Products

Purges trapped air from cooling system Tests for coolant system leaks Refills cooling system quickly and cleanly Rubber body adapters cover most ...

Replacement Cone Adapter for 6520 Connects to regulator

Straight Lock-On Air Chuck - Open-Flow Thumb lever locks onto valve-stem while inflating tire Open (No-Valve) Design 1/4" female NPT 3/4" hex Not ...

Set of 3 durable steel pins designed to lock the serpentine and cam belts on many VAG engines Insert into holes on tensioner housing to hold arm s...

Designed for locking the cam gears in place during timing belt service to ensure accurate alignment Services: 2019+ Ford and Lincoln vehicles with...

Verifies proper alignment of the camshaft sensor (induction) plate during timing service Ensures precise positioning to support accurate engine ti...

Designed for removing and installing transfer case mount bushings on BMW vehicles with B58 engines and ATC13 transfer cases Ensures precise fitmen...

Securely holds wheel during removal and installation onto the wheel hub Threads into the Wheel Hub for vehicles that use Lug Bolts instead of whe...

Use for install of wheel hub oil seal on single or dual wheel axle assemblies Seal installer adapter is driven with the 7" detachable handle Appli...

Removes the front seal and wear ring from crankshaft Includes: Crankshaft Front Seal and Wear Ring Remover Services: Ford F-250, F350, F450, F-550...

Removes the front seal and wear ring from crankshaft on PowerStroke engine Services: 2003-2007 F-250, F350, F-450, F-550, Excursion / 2004-2007 F-...

Installs the front seal and wear ring on the crankshaft for 6.4L Ford Powerstroke Designed to eliminate lip flare on the wear sleeve and installs ...

Installer is designed to eliminate lip-flare on the wear sleeve, which can cause oil leaks during install Properly installs the seal, which helps ...

Remover is designed to quickly and easily remove the seal and wear ring without damaging the crankshaft The Crankshaft Rear Seal Wear Ring Remover...

This comprehensive kit contains all the essential tools for servicing the crankshaft front and rear seals on Ford Powerstroke diesel engines Inclu...

Kit contains everything required to perform timing service on 4.6L, 5.4L and 6.8L Ford Triton engines This comprehensive kit includes the followin...

Kit contains everything required to perform timing service on 3.5L EcoBoost engines It also services some 3.5L Duratec (non-turbo), 2.7L & 3.7...

Fits newer 12mm turbocharger bolts on Cummins ISB 5.9L and 6.7L Turbo Diesel Engines 12mm 12-point design 1/2" drive Ideal for cleaning and servic...

Fits older 15mm turbocharger bolts on Cummins ISB 5.9L and 6.7L Turbo Diesel Engines 15mm 12-point wrench 1/2" drive Ideal for cleaning and servic...

Fits both older 15mm and newer 12mm turbocharger bolts on Cummins ISB 5.9L and 6.7L Turbo Diesel Engines 1/2 In Square Drive Durable construction ...

Removes fluid through the bleeder nipple with shop air 1 liter capacity, 1 meter (39") long tube with universal adapter Gun with locking trigger a...

Creates pressure to push brake fluid through the system 3 liter capacity tank with pressure release valve Filling hole with screw cap 0-70 PSI gau...

Replacement seal for 7015 Brake Bleeder

Replacement Filler Cap for 7015 Pressure Brake Bleeder Tank.

Applications: Round Master Cylinders, especially found on Japanese makes Included in 11 Pc. Master Cylinder Adapter Kit - CTA Part # 7300 Include...

Used in conjunction with 7024 to close hole on 2-hole master cylinder Included in 11pc. Master Cylinder Adapter Kit - CTA Part # 7300 I.D. = 43.5m...

Application: GM / Chrysler Used in conjunction with 7023 to close hole on 2-hole master cylinder Included in 11pc. Master Cylinder Adapter Kit - C...

Application: Nissan Commercial Included in 11pc. Master Cylinder Adapter Kit - CTA Part # 7300 I.D. = 49.5mm O.D. = 66.5mm Nitto fitting size: 1/...

I.D. = 44.2mm O.D. = 57mm Applications: BMW / Audi Nitto fitting size: 1/2" / Threads: 1/8" BSP

Internal Male Insert O.D. = 56mm Adapter O.D. = 79.5mm Depth: 18mm Nitto fitting size: 1/2" / Threads: 1/8" BSP Included in 13pc. Master Cylind...

Applications: Nissan, Mitsubishi, Subaru Included in 11pc. Master Cylinder Adapter Kit - CTA Part # 7300 Internal Male Insert O.D. = 34.5mm Adapte...

Application: 1991-2005 Honda/Acura NSX (Not limited to) Included in 10pc. Master Cylinder Adapter Kit - CTA Part # 7021 Internal Male Insert O.D. ...

Application: European & Domestic Length: 128mm Width: 100mm Included in 10pc. Master Cylinder Adapter Kit - CTA Part # 7021 Replacement Compon...