Products

Service male hex drain plugs. Offset head with anti-slip rubber grip, 6 point wrench end plus open end Chrome vanadium steel Size: 15mm

For hard-to-reach filters Features a swivel design, locking nut, heavy-duty yoke, link mechanism, and comfort grip Band width: 18.5mm Adjustab...

For hard-to-reach filters Features a swivel design, locking nut, heavy-duty yoke, link mechanism, comfort grip Band width: 18.5mm Adjustable s...

Service male hex drain plugs. Offset head with anti-slip rubber grip, 6 point wrench end plus open end Chrome vanadium steel Size: 17mm

2" band conforms to all shapes and tightens 5.5" long handle 1/2" Square drive Range: 6" (152mm) diameter

Thick 2" wide band is assembed to forged handle 3/8" and 1/2" drive ends Range: 9" (229mm) diameter Strap may be red or black

For flaring and expanding tailpipes Range: 1-1/2 to 2-1/2" / 38 to 64mm I.D. Tailpipe Expander - Medium Instructions: Insert tool into pip...

For flaring and expanding tailpipes Range: 2-1/8 to 3-1/2" / 54 to 89mm I.D. Tailpipe Expander - Large Instructions: Insert tool into pipe...

Toyota Timing Belt Tensioner Compressor Allows for easy belt replacement For 95 & Up T100, Tacoma & 4 Runner trucks Internal nut to ex...

CLICK HERE TO VIEW PRO THREAD FLYER • Includes 10 inserts: 1.5D, 15.0mm • Use with CTA Kit #37109 PRO-THREAD FEATURES: • Pro-Thread Kits offer...

• Includes 10 inserts: 1.5D, 21.0mm • Use with CTA Kit #37149 PRO-THREAD FEATURES: • Pro-Thread Kits offer a cost effective method of repairing and...

Adjusts timing belts that have idler pulleys with pin holes Pins in offset head of tool engage the pulley to rotate around the retaining bolt D...

Special configuration with 6 internal slots to service timing belt tensioner Required when replacing the idler Use with 1/2” square or 7/8” hex dr...

Extra-long (26" / 66cm) handled tool with special jaws relieves tension on belt tensioner for poly-ribbed belt service Services: ...

Quickly and easily install stretch belts found on many late model vehicles These drive systems do not have a tensioner and require the proper inst...

Removes injectors on many Dodge pickups & vans Cummins 5.9L & 6.7L Diesel engines Application Details Make Model/Engine Year ...

Quickly and easily install stretch belts found on many late model vehicles These drive systems do not have a tensioner and require the proper inst...

Services Brakes (Dodge), Fuel Pumps (Nissan), Rear Trailing arms (Honda), GM, Ford, Smart (Mercedes Benz) & OFO Dockless bicycles Applications...

“Lollipop” wrench locks the pulley on the waterpump and easily loosens stubborn bolts found on: VW Polo, Golf, Passat and Audi 80/A4 Inc...

Adjustable handle position allows the tension to be applied directly to the idler roller even with limited access Pins on tool engage the offset...

Essential kit when replacing timing belts Includes 3 single-arm jaws, 3 double-arm jaws (17, 23, 25mm openings), yoke and center screw Works on...

Uniquely designed tool is used to remove the A/C low side coupler on Mercedes Benz S-class, E-class, C-class and CLS models ranging from 2002-2014...

2-pin wrench adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tensio...

Adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tension adjustment ...

3 Pc. Pin Set Use with CTA #2765 - Timing Belt Wrench Set - VW/Audi Compare to Factory Tool #T40011 & #T10115

Secures Bosch diesel injection pump sprocket from rotating during R & R of cam shaft drive belt on '99 & up TDI engines. Also works on ...

For installing timing belts on VW TDI (ALH only) including 1999-2004 Golf, Jetta & Beetle Includes the following tools: 2766 - 2-Pin Tensione...

For VAG 1.9L & 2.0L TDI PD DOHC Engines found on Audi A4, A6, VW Golf, Jetta and Touareg Models Includes: 2 Crankshaft Holders and complete se...

Diesel Compression Tester Gauge & Hose Assembly Replacement component for kit 2800 Use with CTA Diesel Compression Adapters 2800X01-2800X32 (s...

Features a 2-1/2-Inch / 63mm-diameter gauge with dual-calibration (0 - 1,000 PIS / 0 - 70kg/cm2) and side-release valve for multiple readings with...

Applications: For glow plug testing on GM 4.3L 6 Cyl. 4.3L & 5.7L 8 Cyl., Ford/Navistar 6.9L & 7.3L, and International Harvester 6.9L (10m...

Applications: For injector testing on VW, Volvo, Audi, Dodge, Mercedes and Cummins 5.9L (24mm x 2.0) MADE IN USA

Applications: For glow plug on GM 6.2L V8 (10mm x 1.0) MADE IN USA

Applications: For glow testing on GM/Isuzu 1.8L & 2.2L, 6.6 Duramax Diesel, Toyota 1.8L (10mm x 1.25) 2800x04 : OAL: 65.55mm Injector end - th...

Applications: For glow testing on Toyota & Nissan 2.2L and 2 & 3 Cyl. Mitsubishi, Ford Escort 2.0L and some Kubota (10mm X 1.25) 2800x05 :...

Applications: For injector testing on Renault and Opel (22mm X 1.5) MADE IN USA