Products

Includes VibroBar and retaining clip only Use with VibroShock Impact Tool Kit - CTA#1000 Heavy duty design Removes fr...

8mm impact socket with internal edge 3/8" square drive Use with VibroShock Impact Tool Kit - CTA#1000 Removes frozen ...

9mm impact socket with internal edge 3/8" square drive Use with VibroShock Impact Tool Kit - CTA#1000 Removes frozen ...

10mm impact socket with internal edge 3/8" square drive Use with VibroShock Impact Tool Kit - CTA#1000 Removes frozen...

11mm impact socket with internal edge 3/8" square drive Use with VibroShock Impact Tool Kit - CTA#1000 Removes frozen...

12mm impact socket with internal edge 3/8" square drive Use with VibroShock Impact Tool Kit - CTA#1000 Removes frozen...

13mm impact socket with internal edge 3/8" square drive Use with VibroShock Impact Tool Kit - CTA#1000 Removes frozen...

14mm impact socket with internal edge 3/8" square drive Use with VibroShock Impact Tool Kit - CTA#1000 Removes frozen...

For replacing the fuel filter or servicing the water sensor without damage to parts. Services '01 - '11 6.6L Duramax diesel engines. 1...

VAG Timing Tool Kit - 1.8L & 2.0L (TSI / TFSI) includes the following: 1032 - 3 Pc. V.A.G. Camshaft Adjusting Socket Set - 2.0L (TFSI) For rem...

Gravity fill tool is designed to service the Haldex/Performance Differential Found in VW/Audi vehicles with the VAQ system Hose assemble featur...

Easy access to small metric hex fasteners found on hose clamps and other applications Rugged cable shaft High torque applications ...

Counter-weighted design for high torque applications, including: Subaru, Toyota, Isuzu, Kia, Nissan, BMW, Dodge, Ford & Jeep OAL: 89mm Use...

Removes and installs the climate control blower motor Applications Make Model Year Volvo S60 2011-2016 Volvo S60L 2007-2016 Volvo S...

Compresses valve springs without having to remove the head. Forged construction with 3/8" square drive and built-in jaws Services 1991...

Puller component from #1094 Benz CDI Common Rail Injector Puller Kit U-Bracket design

Acts as a guide rail to properly route the timing chain during installation on Mercedes-Benz M642 3.0L V6 CDi diesel engines Compare to Mercedes-B...

Installs front crankshaft oil seal and wear sleeve to repair grooved crankshaft surfaces Ensures proper depth and alignment during seal and sleeve...

Stubby design for clearance when servicing Transfer Case/Transmission fill plugs on 2012 & up Jeep Wrangler w/ 6 speed manual transmission (NS...

Replacement Blow Mold Case for 1189 - 18 Pc. Deep Metric Socket Set ATTENTION! Case ONLY No sockets included

Used for removing plastic drain plugs found on many late model vehicles Will NOT damage drain plugs Adapter is marked with the #3 for ...

Used for removing plastic drain plugs found on many late model vehicles Will NOT damage drain plugs Adapter is marked with the #1 for identificati...

6 Pt. x 11mm Socket - Long 3/8" Square Drive

5/8" x 12 Point Magnetic Thin Wall - 20.2mm / 0.795" OD 3/8" Square Drive OAL: 6" Applications Make Model Year Jeep Grand Cherokee 199...

2 Pc set includes filp socket and 3" extension "Flip" design offers 2 hex sizes in one socket Use with 1/2" drive extended shank impact tools or re...

2 Pc set includes filp socket and 3" extension Designed to service 21mm lug nuts with missing or distorted chrome caps, found on many Dodge, Chrysl...

For hard-to-reach valves, straight-on chuck with 30 degree reverse angle 1/4" female NPT 5/8" hex "14"" Straight On Chuck" Maximum Pressure 1...

SUPERSEDED BY CTA #4021 - Piston Ring Compressor 3" Application: Passenger Cars Depth: 31/2" (89mm) Range: 21/8 - 5" (54 - 127mm) Features ratchet...

Use for replacing worn or damaged manual transmission mount The vulcanized rubber mount separates from the housing causing an increase of NVH duri...

Applications: For 12mm glow plug on Mercedes Benz, BMW 2.4L, Lincoln, Mark VII Continental, Puegot 2.0L and 2.3L, VW, Volvo, Audi 1.5L, 1.6L, 2.0L...

Applications: 7.3L Ford IDI (Indirect Injection) 10mm x 1.0 Glow Plugs Services: Ford Navistar International from 1988-1994 Click 'Application Cha...

For alignment of the cam and crankshafts Enables correct installation of the camshaft with the cam cover Applications Make Model Year V...

Replacement components for 2864 Volvo Cam Locking Tool Includes: 2 pcs

All the tools needed to service '09 & up models with turbo engines - TFSI Includes crank counter hold tool, crankshaft thrust piece, (4) drift...