Products

Hard-to-find bit-sockets to service "Figure 8" screws on old GM cars, trucks & some non-automotive applications Applications include headlight...

Clamp hoses and vacuum lines with special swivel jaws Maintain a parallel clamp Features built-in ratchet mechanism that locks handles...

Remove Fuel, Vacuum or Heater Hoses from 6mm to 15mm diameter Quickly and easily reaches into tight areas to access hose Push pliers between part ...

Removes and installs newer style flat-band or spring clamps Use on hose assemblies found on Ford, GM and various imports Features spring-loaded ra...

Spread snap rings found on transmissions, brakes, clutch shafts, etc. Spring loaded with single piece forged jaws Could also be used seperate p...

Push-button mechanism converts pliers from internal to external Includes interchangeable tips: Straight (.036" / .9mm, .047" / 1.20mm, .070" / 1.8...

Spring Loaded clamping action allows easy plugging of small holes when using a MIG welder Copper alloy backing plate prevents burn through Weld wi...

Reversible ratchet type with chrome-plated tube, knurled handle and knurled locking nut holding toque setting Packed in blow mold case ...

Reversible ratchet type with chrome-plated tube, knurled handle and knurled locking nut holding toque setting Packed in blow mold case Drive: 1/2"...

Installs Oil Filter Housing Caps with 35Nm (25.81 ft-lb) (309.78 in-lbs) torque specifications Internal torque limiting device prevents over-tight...

Installs Oil Filter Housing Caps with 25Nm (18.44 ft-lb) (221.27 in-lbs) torque specifications Internal torque limiting device prevents over-tight...

Use for accurate tightening of head and manifold bolts whenever a torque angle is required by the manufacturer's specification Also called "torq...

Will break chains from #35 to #530, including cam chains and drive chains Kit includes 3 anvils, 3 pins, riveter, spring, press plate, lever, ha...

Fits hard-to-raech areas Range: 1/4" to 3/4" / 6mm to 19mm Use with 1/2" drive tools Stud Remover Basic Instructions: Stud Remover Compo...

Removes broken studs, set screws, pipes and fittings Hardened extractors are tapered with special 4-point ends to bite into fastener ...

For removal of female style plugs with rounded off inserts Bolt, Stud or Screw Size: 1/4" Pipe Size: 5/16" Drill Size: 1/8"

For removal of female style plugs with rounded off inserts Bolt, Stud or Screw Size: 3/8" Pipe Size: 3/8" Drill Size: 3/16"

For removal of female style plugs with rounded off inserts Bolt, Stud or Screw Size: 7/16" Pipe Size: 1/8" Drill Size: 15/64"

For removal of female style plugs with rounded off inserts Bolt, Stud or Screw Size: 1/2" - 9/16" Pipe Size: 1/4" Drill Size: 5...

For removal of female style plugs with rounded off inserts Bolt, Stud or Screw Size: 5/8" Pipe Size: 3/8" Drill Size: 3/8"

For removal of female style plugs with rounded off inserts 1/2" plugs with 3/8" square hole

For removal of female style plugs with rounded off inserts 3/4" plugs with 1/2" square hole

Removes broken studs, set screws and pipe fittings Chrome- moly steel with reverse tapered threads Includes: #9041, #9042, #9043, #9044, #9045 MAD...

Bends 3/16, 1/4, 5/16, and 3/8" (4.8, 6.4, 7.9, and 9.5mm) O.D. tubing without kinking or collapsing OAL: 8" / 20cm

Double flares soft steel tubing up to .040" / 1mm wall thickness Single flares soft copper, metal, and tubing Sizes: 3/16, 1/4, 5/16, 3/8 and 1/2"

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Components CTA # SIZE DRIV...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E4 - OAL 42mm 1/4" D...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E5 - OAL 42mm 1/4" D...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E6 - OAL 42mm 1/4" D...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E7 - OAL 42mm 1/4" D...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E8 - OAL 42mm 1/4" D...

Special 74.5 diameter for many import and domestic applications Deep-reach design for proper fitment Die-cast aluminum forging provides extra sten...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E12 - OAL 60mm 3/8" ...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E14 - OAL 60mm 3/8" ...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E16 - OAL 60mm 3/8" ...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E18 -OAL 73mm 1/2" D...