Products

Holds Harmonic Balancer in place when removing or installing center bolt of Ford Taurus Pulley Extension Tool can be used to turn the engine to ga...

Yoke is designed to safely apply torque on the pinion nut Universal bolt placement design with ½” slots will fit the flange bolt centerlines up to...

2-piece socket design Use with 3/8" drive tools Size: 9mm hex Ford, Mazda

12mm & 16mm threaded male ends fit spark plug ports on Ford Triton engines 8-1/2" / 22cm long flex hose for easy accessibility Works with #...

Primes the lubricating system of new and rebuilt engines, sending oil to the internal moving parts before the first start Use with 3/8" o...

Primes the lubricating system of new and rebuilt engines, sending oil to the internal moving parts before the first start Use with 3/8" o...

Comprehensive tool kit services Ford, Lincoln, Land Rover & Mazda 1.4L, 1.5L, 1.6L, 2.0L, 2.3L, 2.5L & 3.0L engines Used on EcoBoost, Dur...

Used to install Harmonic Balancers on V8s and V6s on '04 - current Ford*, '08 - current GM**, & '06-current Chrysler/Dodge*** Reduces risk of...

Extracts the broken porcelain from spark plug sleeves that broke during a regular service Services: Ford ’04 – ’08 (4.6, 5.4 & 6.8 engines) ...

Extracts broken-off spark plug sleeves in ’04 – ’08 (4.6, 5.4 & 6.8 engines) Includes: 8”/20cm high-speed steel tap Extractor Guide Washer Ja...

For use with CTA #2367

Service Ford Triton V8 and V10 Engines 2-1/2" long with 3/8" square drive

Service Ford Triton V8 and V10 Engines 9/16" hex x 6" long with 3/8" square drive Features swivel extension & special plastic inse...

6 Point Hex Magnetic Service Ford Triton V8 and V10 Engines Length: 10" 3/8" square drive

Primarily services Ford 4.0L SOHC V6's And some late model 4.6L V8's 3 pieces with detachable end to enable access in tight areas Compare to Ford ...

For locking and positioning camshafts, crankshafts & injection pump sprockets when replacing timing belts or chains Includes setting gauge and...

Services U-Joints on 80s & up Mustang, Crown Vic, Taurus, Explorer, Ranger, F150 & Mercury equivalents Chrome Vanadium socket is 1...

Tool is used for holding the Crankshaft Damper on 2005-2011 Ford 2.0L, 2.3L & 2.5L engines Applications: Fusion, Focus, Transit, Milan, MKZ, E...

Comprehensive tool kit services Ford, Lincoln, Land Rover & Mazda 1.4L, 1.5L, 1.6L, 2.0L, 2.3L, 2.5L & 3.0L engines Used on EcoBoost, Dura...

Separates the lower control arm ball joint from the steering knuckle Services 2005-2018 Ford, Lincoln & Mercury models (Not Limited Too) Extra...

Click here for application chart of clutch tool range Spline Diameter: 1" Metric Spline: 25.4000 Spline Count: 23 Pilot Diameter: .590 Metric Pilo...

Click here for application chart of clutch tool range Spline Diameter: 15/16" Metric Spline: 23.8125 Spline Count: 22 Pilot Diameter: .590 Metric ...

Click here for application chart of clutch tool range Spline Diameter: 15/16" Metric Spline: 23.8125 Spline Count: 10 Pilot Diameter: .625 Metric ...

Use for install of wheel hub oil seal on single or dual wheel axle assemblies Seal installer adapter is driven with the 7" detachable handle Appli...

Kit contains everything required to perform timing service on 4.6L, 5.4L and 6.8L Ford Triton engines This comprehensive kit includes the followin...

New Design with off-set Nitto fitting Internal Male Insert O.D. = 37mm I.D. 50.07mm Adapter O.D. = 66.5mm 3 Tab design For use with #7015 Bleeder...

For pressurizing Cooling Systems All metal construction with 52mm x 2.5mm Buttress Threads Use with CTA #7050 Pressure Tester Compatible with oth...

For pressurizing Cooling Systems All metal construction For vehicles with small, deep necks Use with CTA #7050 Pressure Tester Compatible with ot...

For pressurizing Cooling Systems All metal construction with 52mm x 2.5mm Buttress Threads Use with CTA #7050 Pressure Tester Compatible with oth...

To Test Pressure Relief Valve in Cooling System Cap All metal construction with 52mm x 2.5mm Buttress Threads Use with CTA #7050 Pressure Tester ...

To Test Pressure Relief Valve in Cooling System Cap All metal construction 32mm Use with CTA #7050 Pressure Tester Compatible with other Pressure...

This Funnel kit combines the necessary tools used for servicing GM, Land Rover, Jaguar, & Hyundai Kit Includes: 7471 - Oil Filling Funnel 746...

Must have adapter for filling/adding fluid to the 5R55W & 5R55S Automatic Transmissions Use with CTA #7400 ATF Filling Tank Can also be used w...

Adapter 1/2 Turn Thread Color: Red Included in kit #7333 O.D. of working end: 35.25mm Applications Make Model Year Cadillac CTS *******...

Services Ford vehicles w/ 4.6L, 5.4L & 6.8L 3V engine Instructions 1. Install 2-leg main body below the camshaft and above the engine block ...