Products

Counter-weighted design for high torque applications, including: Subaru, Toyota, Isuzu, Kia, Nissan, BMW, Dodge, Ford & Jeep OAL: 89mm Use...

Quickly and easily install stretch belts found on many late model vehicles These drive systems do not have a tensioner and require the proper inst...

Applications: For glow testing on GM/Isuzu 1.8L & 2.2L, 6.6 Duramax Diesel, Toyota 1.8L (10mm x 1.25) 2800x04 : OAL: 65.55mm Injector end - th...

Applications: For glow testing on Toyota & Nissan 2.2L and 2 & 3 Cyl. Mitsubishi, Ford Escort 2.0L and some Kubota (10mm X 1.25) 2800x05 :...

Applications: For 12mm glow plug on Mercedes Benz, BMW 2.4L, Lincoln, Mark VII Continental, Puegot 2.0L and 2.3L, VW, Volvo, Audi 1.5L, 1.6L, 2.0L...

Applications: For 18mm glow plugs on Mercedes Benz, Audi, BMW, VW, Isuzu, Lincoln, Peugot, (18mm x 1.5) Click 'Application Chart' for full applica...

Press fit rear seal to engine block & crankshaft for proper fitment of inner & outer seal body Services GM/ISUZU 6.6L Duramax 2001-2016 GM...

Press fit front seal to engine block & crankshaft for proper fitment of inner & outer seal body (works w/ 3878) Services GM/ISUZU 6.6L Dur...

This crankshaft seal and wear sleeve remover is designed for servicing the front crankshaft seal on 2001 and newer 6.6L Duramax diesel engines. Th...

This rear crankshaft seal remover is designed to remove the rear seal on 2001 and newer 6.6L Duramax diesel engines. Its three jaws grab the inner...

Master kit for servicing the front and rear crankshaft seals on 2001-2016 6.6L Duramax diesel engines Includes: 3878 Rear Crankshaft Seal Install...

Applications: Isuzu Trooper, Rodeo, Amigo & pick-ups (1988+) Honda Passport & Jeep J20 pick-ups w/ Dana 60 axle (1989+) Nissan Xterra (...

This tool is part of CTA #4380 Spare Tire Tool Kit Use for removal & installation of spare tires mounted under vehicle Working end - Pin He...

Removes and installs spare tires mounted under vehicle quickly and safely, without damage to spare tire pulley system Set of 8 color-coded tools, ...

Required to hold the flywheel in a secure position while servicing the balancer retaining bolt This tool allows for securing the flywheel by utili...

The timing tool set includes the tools required to properly service GM Atlas/Vortec engine family Kit includes: 7459 - GM Lower Timing Gear Retai...

Click here for application chart of clutch tool range Spline Diameter: 1" Metric Spline: 25.4000 Spline Count: 14 Pilot Diameter: .590 Metric Pilo...

Click here for application chart of clutch tool range Spline Diameter: 1" Metric Spline: 25.4000 Spline Count: 24 Pilot Diameter: .670 Metric Pilo...

Click here for application chart of clutch tool range Spline Diameter: 1 1/8" Metric Spline: 28.5750 Spline Count: 10 Pilot Diameter: .590 Metric ...

Click here for application chart of clutch tool range Spline Diameter: 15/16" Metric Spline: 23.8125 Spline Count: 14 Pilot Diameter: .470 Metric ...

Click here for application chart of clutch tool range Spline Diameter: 1 1/2" Metric Spline: 38.1000 Spline Count: 10 Pilot Diameter: .980 Metric ...

Click here for application chart of clutch tool range Spline Diameter: 1-3/4" Metric Spline: 44.4500 Spline Count: 10 Pilot Diameter: 0.980 Metric...

Applications: Round Master Cylinders, especially found on Japanese makes Included in 11 Pc. Master Cylinder Adapter Kit - CTA Part # 7300 Include...

Tests automotive pressurized cooling systems up to 30 PSI Kit includes pump with gauge, 12” hose and cap adapter to check 3/4” deep filler necks, ...

Kit includes all metal construction cooling system testing adapters for US & Asian market vehicles Use with CTA 7060 Radiator Pressure Tester ...

For pressurizing Cooling Systems All metal construction For vehicles with small, shallow necks Use with CTA #7050 Pressure Tester Compatible with...

For pressurizing Cooling Systems All metal construction For vehicles with small, deep necks Use with CTA #7050 Pressure Tester Compatible with ot...

To Test Pressure Relief Valve in Cooling System Cap All metal construction 32mm Use with CTA #7050 Pressure Tester Compatible with other Pressure...

Keeps the lower timing gear locked while the cylinder head is removed from engine Services I4, I5 & I6 (Atlas) engines Without this tool, the ...

For removing and installing front hub/axle nuts 1/2" square drive Size: 30mm Point: 6 Safe for Impact usage