Products

Contains press, 3 receiver tubes, installation, and removal adapters, plus 4WD adapters to service '67 thru current 1/2 and 3/4 ton vehicles with ...

Remove and install screw-in type ball joints 3/4" drive Size: 1-59/64" Applications: Mid-size, rear-wheel drive cars

Remove and install screw-in type ball joints 3/4" drive Size: 2-9/64" Applications: Light trucks and vans

Helps remove stuck front hubs on 2500 (3/4 ton) and 3500 (1 ton) Dodge P/U's (Late 1990s & Up) Acts as pushing tool by placing against hub bol...

Securely lock and unlock 'Clic' & 'Clic-R' hose clamps. This style of hose clamps offer a variety of benefits including: Clamps are re-usable...

1/2" square drive Applications: Ford Ranger, Bronco II & Explorer w/ manual hubs (1993+) Ford F-series 1/2, 3/4 &...

Applications: Ford Ranger & Bronco II w/ manual hubs (1984-1992) Ford F-series 1/2 ton truck and full-size Bronco w/ D...

Applications: Dodge Trucks w/ Dana 60 Manual Hubs (1990-1993) 1/2" drive tools Size: 2-9/16" Rounded 6-Point

Designed to service 19mm lug nuts with missing and distorted chrome caps, found on many Dodge, Chrysler, Jeep, Ford, Lincoln, GM & More ...

Designed to service 22mm lug nuts with missing or distorted chrome caps, found on many Dodge, Chrysler, Jeep & More Chrome capped lug ...

Engineered for swift and energy-efficient disc brake servicing, reducing downtime, Dual-directional functionality caters to both regular and rever...

Prevents spillage of hot oil from the oil filter cap on Dodge RAM 6.7L Cummins Diesel Heavy-Duty truck, due to the placement of the oil filter ...

This tool is part of CTA #4380 Spare Tire Tool Kit Use for removal & installation of spare tires mounted under vehicle Working end - 5/8" H...

This tool is part of CTA #4380 Spare Tire Tool Kit Use for removal & installation of spare tires mounted under vehicle Working end - Slotte...

Removes and installs spare tires mounted under vehicle quickly and safely, without damage to spare tire pulley system Set of 8 color-coded tools, ...

Cam Phaser & Timing Chain Locking / Holding Set for 3.0L, 3.2L & 3.6L VVT Pentastar engines Includes 2 camshaft phaser holders and 3 timin...

Cam Phaser & Timing Chain Locking / Holding kit for 3.0L, 3.2L, 3.6L VVT & VVL Pentastar engines Includes 2 camshaft phaser holders, 5 tim...

Holds the camshaft phaser while performing the loosening and tightening of the Oil Control Valves during service procedures on the 3.6L Pentastar ...

For loosening tension on timing chains during camshaft service procedures Compare to FCA Group Factory Tool #’s 10200A & 10200-A Material: Dur...

Replacement L-Pin with loop and 90 degree angle is used in kits: 5000 5001 5006 1205

Properly setup and service engine timing Tool locks the timing chains against the hydraulic tensioners to prevent tensioner ratcheting and pisto...

Installs Factory front seal #3937111, #3904353 and the seal found in kit #3802820 Note: CTA #5046 is required if the seal has a wear sleeve Appli...

6 spread pins for an exact fit for Dodge applications Applications: Dodge RAM 1500-4500 models Wheel hub assemblies usually go bad when the wheel...

Tool is used for installing the front Crankshaft Wear Sleeve Note: CTA #5041 is required for installing factory seal #3937111, #3904353 and the se...

Offset Crowfoot design 12 point "Bi-hex" creates a maximum grip Used on the newest ISX Cummins engine, found in many Freightliners, Highway Utilit...

Designed to fit the flex plate teeth Insert the tool into the flywheel housing until it engages the ring gear Use with a 1/2" square drive tool (r...

Male to Female Threaded Adapter used with #5405, #5407 & #5409 to extract dipstick tube, using any standard thread (5/8"-18 TPI) slide hammer ...

Extracts broken dipstick tubes, a common issue on Dodge 5.7L & 6.1L HEMI Engines during engine service When the dipstick tube breaks off, a pi...

Extracts broken dipstick tubes, a common issue on Dodge 5.7L & 6.1L HEMI Engines during engine service When the dipstick tube breaks off, a pi...

4 Pc master set for extracting broken dipstick tubes on Ford, Dodge, & GM Dipstick tubes are prone to break in these makes and models When the...

Securely holds wheel during removal and installation onto the wheel hub Threads into the Wheel Hub for vehicles that use Lug Bolts instead of whee...

Click here for application chart of clutch tool range Spline Diameter: 1" Metric Spline: 25.4000 Spline Count: 23 Pilot Diameter: .590 Metric Pilo...

Click here for application chart of clutch tool range Spline Diameter: 1 1/2" Metric Spline: 38.1000 Spline Count: 10 Pilot Diameter: .750 Metric ...

Fits newer 12mm turbocharger bolts on Cummins ISB 5.9L and 6.7L Turbo Diesel Engines 12mm 12-point design 1/2" drive Ideal for cleaning and servic...

Fits older 15mm turbocharger bolts on Cummins ISB 5.9L and 6.7L Turbo Diesel Engines 15mm 12-point wrench 1/2" drive Ideal for cleaning and servic...

Fits both older 15mm and newer 12mm turbocharger bolts on Cummins ISB 5.9L and 6.7L Turbo Diesel Engines 1/2 In Square Drive Durable construction ...