Products

Cam Phaser & Timing Chain Locking / Holding kit for 3.0L, 3.2L, 3.6L VVT & VVL Pentastar engines Includes 2 camshaft phaser holders, 5 tim...

Holds the camshaft phaser while performing the loosening and tightening of the Oil Control Valves during service procedures on the 3.6L Pentastar ...

For loosening tension on timing chains during camshaft service procedures Compare to FCA Group Factory Tool #’s 10200A & 10200-A Material: Dur...

Replacement L-Pin with loop and 90 degree angle is used in kits: 5000 5001 5006 1205

Properly setup and service engine timing Tool locks the timing chains against the hydraulic tensioners to prevent tensioner ratcheting and pisto...

Used in conjunction with 7024 to close hole on 2-hole master cylinder Included in 11pc. Master Cylinder Adapter Kit - CTA Part # 7300 I.D. = 43.5m...

Application: GM / Chrysler Used in conjunction with 7023 to close hole on 2-hole master cylinder Included in 11pc. Master Cylinder Adapter Kit - C...

Applications: GM / Chrysler Included in 11pc. Master Cylinder Adapter Kit - CTA Part # 7300 7" x 4 1/2" Rectangular Replacement Components: 7022X...

I.D. = 42mm O.D. = 57.5mm Included in 11pc. Master Cylinder Adapter Kit - CTA Part # 7300 Nitto fitting size: 1/2" / Threads: 1/8" BSP Applicati...

Application: Nissan, Chrysler, Jeep, Ford, Jaguar, Kia Mazda, Subaru Early model design with 3 "L"-Shaped Tabs Included in 10pc. Master Cylind...

Tests automotive pressurized cooling systems up to 30 PSI Kit includes pump with gauge, 12” hose and cap adapter to check 3/4” deep filler necks, ...

Securely holds wheel during removal and installation onto the wheel hub Threads into the Wheel Hub for vehicles that use Lug Bolts instead of whe...

For pressurizing Cooling Systems All metal construction For vehicles with small, shallow necks Use with CTA #7050 Pressure Tester Compatible with...

For pressurizing Cooling Systems All metal construction For vehicles with small, deep necks Use with CTA #7050 Pressure Tester Compatible with ot...

To Test Pressure Relief Valve in Cooling System Cap All metal construction 32mm Use with CTA #7050 Pressure Tester Compatible with other Pressure...

To Test Pressure Relief Valve in Cooling System Cap All metal construction 32mm Use with CTA #7050 Pressure Tester Compatible with other Pressure...

Removes harmonic balancers without tapped holes Services V6 & V8: GM (5.3L, 5.7L 6.0L, 6.2L & 7.0L) Chrysler, Dodge & Jeep (3.5L, 3.7...

Designed to service 17mm lug nuts or Lug Bolts with missing and distorted chrome caps, found on many Dodge, Chrysler, Jeep, Ford, Lincoln, GM,...

Comprehensive "Flip" socket set offering two hex sizes in one socket. Half metric sizes for the removal of inflated, warped and mangled chrome-ca...

This Funnel kit combines the necessary tools used for servicing Chrysler, Dodge, & Jeep Includes: 7471 - Oil Filling Funnel 7469 - Oil Collec...

Use with CTA #7400 Will work on most "Non-CTA" ATF Filling System Tanks Applications: ZF transmission: ZF5hp, ZF6hp, ZF8hp (Look for ...

Adapter 1/2 Turn Thread Color: Bright Green Included in kit #7333 O.D. of working end: 34.50mm Applications Make Model Year Dodge 5.7L ...

Adapter 1/2 Turn Thread Color: Dark Green Included in kit #7333 O.D. of working end: 47.15mm Applications Make Model Year Dodge Durango...

Services 1999-2013 Jeep, Dodge, Chrysler w/ 3.7L & 4.7L and later 3.6L models Services DR, DS, HB, HG, KA, KJ, KK, ND, WK & XK systems 3/8...

Valve spring compressor for Jeep, Dodge & Chrysler 3.7L & 4.7L engines Services DR, HB, KA, KJ, KK & ND systems 3/8" drive Applicatio...

Using this special cable, record the noise from a wireless electric stethoscope on any smartphone while listening live on a Wireless Electronic St...

Sizes: M0, M1, M2, M3, M4, all 3/8" square drive, all packed on socket rail Bits have asymmetrical geometry that provides enhanced installation of...

Securely holds wheel during removal and installation onto the wheel hub Threads into the Wheel Hub for vehicles that use Lug Bolts instead of whe...

Removes the Pivot Pins found on both tilt and telescopic steering columns Works on GM, Ford, and Chryslers with Saginaw steering columns

Chrome Moly color-coded socket with anodized finish Protective plastic sleeve prevents scratching of wheels and lug nuts Internal ma...

Scissor-Type Disconnect Tool Sizes: 5/16” 3/8” Service connectors found on GM, Ford, Mazda and Chrysler

Scissor-Type Disconnect Tool Services connectors on Fords and Chryslers 3/4”, 5/8”, 1/2” & 3/8”

For removing and installing front hub/axle nuts 1/2" square drive 27mm X 6 Point

For removing & installing front hub/axle nuts & injectors Size: 30mm Point: 12 1/2" square drive OAL: 78mm / Depth: 50mm Applications: ...

For removing and installing front hub/axle nuts 1/2" square drive Size: 32mm Point: 6