Products

  Removes the most difficult locking lug bolts quickly, safely and without damage to wheel or rim Great for all vehicles with lost or damaged loc...

Unique design provides interchangeable wrench sizes Flexes up to 45° to grip the direct fuel line from any angle Provides ability to tighten and ...

Services oil and transmission drain plugs and other fasteners Tamperproof socket 1/2" Square drive Size: 16mm, 12 Point Applications: VW, Aud...

14mm x 12-point XZN socket with tamper-proof head services various '03 & up VW, Audi, and Porsche Axle Bolts, Differential Bolts, and Transmi...

27mm socket with window Services injectors found on BMW, Ford, Fiat, Nissan, VW, Mercedes Benz, etc. Black finish with 1/2" square drive

Prevents oil spillage during filter change on vehicles that have filter housing caps with one-way valve Tool screws into cap to drain oil Features...

Size: 18mm Service fasteners on VW, Audi, Porsche, and some Detroit Diesel engines Services Rear axle bolts on Volkswagen's Jetta and Golf mode...

Sizes: (3 piece set) 14mm, 16mm, and 18mm Service fasteners on VW, Audi, Porsche, and some Detroit Diesel engines 18mm size services rear axle bol...

17mm - 12 point Crowfoot designed for removing injector lines on most diesel engines Works great on most Diesel Mercedes Benz, BMW & Sprinter...

Fits 5/8" Spark plug Rubber insert is removable Depth of hole is 2.25" (Solid until 3/8 drive end) Length: 5" Square drive: 3/...

Service 5/8" recessed automotive spark plugs, plus marine, small engine, and specialty motors Includes recessed magnet to hold plug 10" long for d...

Die-Cast Aluminum for extra durability 74mm x 14 Flute Dual 1/2" square drive & 1" hex drive Aluminum die-cast construction Servcies VW, Mazda...

Service the most stubborn Oil Filters and Housings Built with higher torque specs Extra-thick wall construction Combo 3/8" Square and 7/8" Hex Dr...

Remove housings with cartridge-type oil & fuel filters Chrome vanadium steel 3/8" square drive 32mm Application Details Make Model Ye...

Remove housings with cartridge-type oil & fuel filters. Chrome vanadium steel 3/8" square drive 36mm Application Details Make Model ...

“Lollipop” wrench locks the pulley on the waterpump and easily loosens stubborn bolts found on: VW Polo, Golf, Passat and Audi 80/A4 Inc...

Adjustable handle position allows the tension to be applied directly to the idler roller even with limited access Pins on tool engage the offset...

Essential kit when replacing timing belts Includes 3 single-arm jaws, 3 double-arm jaws (17, 23, 25mm openings), yoke and center screw Works on...

2-pin wrench adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tensio...

Adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tension adjustment ...

2-pin wrench adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tension ...

3 Pc. Pin Set Use with CTA #2765 - Timing Belt Wrench Set - VW/Audi Compare to Factory Tool #T40011 & #T10115

For VAG 1.9L & 2.0L TDI PD DOHC Engines found on Audi A4, A6, VW Golf, Jetta and Touareg Models Includes: 2 Crankshaft Holders and complete se...

Applications: For injector testing on VW, Volvo, Audi, Dodge, Mercedes and Cummins 5.9L (24mm x 2.0) MADE IN USA

Applications: For 12mm glow plug on Mercedes Benz, BMW 2.4L, Lincoln, Mark VII Continental, Puegot 2.0L and 2.3L, VW, Volvo, Audi 1.5L, 1.6L, 2.0L...

Applications: For 18mm glow plugs on Mercedes Benz, Audi, BMW, VW, Isuzu, Lincoln, Peugot, (18mm x 1.5) Click 'Application Chart' for full applica...

Locks gears on single, dual or quad overhead engines Holds valve timing when replacing belts 4 piece set Instructions 1. Locate position to...

Holds camshafts in position during timing belt replacement Services many makes, including Fiat, Ford, Honda, Hyundai, Mazda, Mitsubishi, Nissan, S...

Special bars lock camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC ...

Special bars lock camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC ...

  Locks and holds camshafts when adjusting the left and right camshafts Services: Audi A4, A6 & A8 (2001 – 2008) with AVK engine Includes hold...

Aligns and secures camshafts when setting timing 3.0L, 3.2L V6 4v Engines Compare to VW/Audi factory tool #T40133 Applications ...

For use with #2865, 2867 & 2869 Camshaft Holders to lock the crankshaft at TDC Comparable to OEM #T40026 Application Details Make M...

Sets timing in 2.5L, 3.2L, 4.2L, & 5.2L engines Includes 2 steel locking clamps with set of threaded bolts for locking camshafts when settin...

Holds the chain and tensioner in position during assembly and disassembly on many VW & Audi vehicles. Compare to VW/Audi Factory Tool #3366 ...

Locks camshafts in place during timing service on various '01 & up VW, Audi & Porsche vehicles Precision cut Engines: 2.8L (AXK) (BDF), 3....