Specialty Sockets

Services rear axle hub bearing retaining nut on heavy duty RAM trucks Services rear hubs with 12 pins on RAM 2019+ 3500, 4500, 5500 (D2, DD, DP) C...

Extra Low-profile (21.15mm height) required for minimal clearance Services 6.7L Dodge RAM Cummins fuel filter canister (2010+) & RAM 3.0L EcoD...

Full-range deep metric socket set Sizes 6mm to 21mm 120mm long Broached for extra-deep reach Provides access to recessed areas with extra long bol...

"Double-D" socket holds shock piston stem while deep socket is used to remove the nut Internal dimensions: .33"(8mm) long x .25"(6mm) wi...

Set of EPR (5-sided) Torx Plus® profile sockets, from 6EPR to 32EPR Also referred to as Pentalobe sockets Manufactured from satin finish chrome va...

Comprehensive "Flip" socket set offering two hex sizes in one socket. Half metric sizes for the removal of inflated, warped and mangled chrome-ca...

5 point EPR Torx® design Size: 22EPR Drive size: 1/2" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with standard six-sided EP Torx...

7 Point socket for caliper retaining screws Applications: Audi Q7, S5 and various Mercedes Benz models 1/2" square drive OAL: 50mm Applications ...

Unique design provides interchangeable wrench sizes Flexes up to 45° to grip the direct fuel line from any angle Provides ability to tighten and ...

15 Pc comprehensive set offers a wide range of sizes Services elliptical-shaped "Star" Plus fasteners found on many vehicles Applications (Not li...

For service of 10mm male square plugs 3/8" Square drive OD of 10mm end: 18.2mm OD of 3/8" sq. dr. end: 18.9mm OAL: 40mm  Applications: BMW, Ford, ...

Services: Transfer cases Engine oil pans, Manual transmission Differential drain plugs Fill plugs Size: 10mm Drive: 3/8" Essential for every ...

Services: Transfer cases Engine oil pans Manual transmission Differential drain plugs Fill plugs Size: 8mm Drive: 3/8" Essential for every me...

2-piece design for high-torque applications 5-point head and tamper-hole for security fasteners Size: TS30 Drive: 1/4"

Use for Installation and removal of head bolts on Subaru flat boxer engines Services: 1999-2020 Subaru Baja, Forester, Impreza, Legacy, O...

Removes later style central valve on BMW Vanos Hubs and Ford VCTs Services BMW/MINI B36 (1.5L), B38 (1.2L & 1.5L), B48 (2.0L), B58 (3.0L) &...

10 Point x 19mm socket services selected Honda & Acura rear trailing arms 1/2" Square drive Applications Applications include but are not lim...

Special configuration with 6 internal slots to service timing belt tensioner Required when replacing the idler Use with 1/2” square or 7/8” hex dr...

Stubby design for clearance when servicing Transfer Case/Transmission fill plugs on 2012 & up Jeep Wrangler w/ 6 speed manual transmission (NS...

5 point EPR Torx® - Lobe socket design Size: 10EPR - 5Pt. Lobe Drive size: 1/4" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with ...

Nylon rails are pre-printed with socket sizes for easy identification Features 13 recessed springs to hold the socket Rails include mounting holes...

For elliptical-shaped Torx Plus® fasteners Torx Plus® will not fit standard Torx® fasteners Standard Torx® tools will strip if used in Torx Plus® ...

Low-profile E20 Torx® socket removes and installs the low-profile bolts found on Nissan QR25's with automatic transmissions 1/2" drive ...

Special oval shaped bit end services Suspension Strut Housing Nuts found on mostly newer VW & Audi models After removing pinchb...

New 8mm & 10mm sizes Will Service -09 & up Honda Odyssey & Pilot seat tracks Both sizes are required for both the driver & pass...

"Flip" design offers two hex sizes in one socket Half metric sizes for the removal of inflated, warped and mangled chrome-cap style lug nuts foun...

120mm long and deep broached for extra-deep reach Provides access to recessed areas with extra long bolts, as found on some bumpers, rear lamps, g...

5 point EPR Torx® design Size: 14EPR Drive size: 3/8" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with standard six-sided EP Torx...

Slotted Double-D Socket 6 x 8mm

Special design for injectors on small diesel engines 5 Point (Pentagon) Length: 36.85mm Chrome-vanadium construction for durability Broach depth:...

Services elliptical-shaped fasteners now found on many vehicle applications Standard "Star" or Ribe designs will not fit these fasteners Black fin...

Features patented reverse tapered thread to remove stripped lug nuts or lug nuts with missing keys Fits lug nuts measuring 19mm "point-to-point" U...

For elliptical-shaped Torx Plus® fasteners Torx Plus® will not fit standard Torx® fasteners Standard Torx® tools will strip if used in Torx Plu...

17mm x 6-point "Flower Design" impact socket Services '09 & up lug bolts Socket is 85mm long with protective plastic sleeve to prevent scratc...

10 point bit socket services Tuner Lug Nuts and some import OE Lug Nuts Bit-in-socket design for extra torquing power Deep reach 5" / 125mm long P...

Flat-face precision fit prevents rounding off flush-mount "Star" bolts Flat-Cut design grabs Low-profile "Star" fasteners regular sockets can't I...