Products

For late model Subaru's 65mm x 14 Flute Fits late model Subaru's where other 65mm will not work Precision-stamped 3/8" square drive Black fini...

Speeds valve lash adjustment Install the proper blades for intake and exhaust settings Offset blades for easy insertion Includes two red handles M...

.005 through .020" by thousandths Metric markings included Offset blades for easy insertion on valve tappets and other difficult access applica...

.008, .010, .012, .013, .014, .015, .016, .018, .019, .020, .025, .026" Metric markings included Offset blades for easy insertion on valve tapp...

For long reach applications, especially diesel 12" blades - .0015, .002, .003, .004, .005, .006, .007, .008, .009, .010, .011, .012, .013, .014, ....

3" straight blades - .04, .05, .06, .07, .08, .09, 10, .15, .20, .25, .30, .35, .40, .45, .50, .55, .60, .70, .75, .80, .85, .90, .95, 1.00mm

3" straight blades - .002, .003, .004, .006, .008, .012, .013, .020, .025", plus steel ruler Metric markings included *Technical photo for refere...

3" straight blades - .002, .003, .004, .005, .006, .008, .011, .012, .013, .014, .016, .018, .020, .022, .025", plus steel marking ruler Metric ma...

3" straight blades - .0015, .002, .0025, .003 through .025" by thousandths Metric markings included *Technical photo for reference only

4" straight blades - .0015, .002, .0025, .003 through .026" and .028, .030, .032, .035 and .10" blade Metric markings included *Technical photo f...

1-1/2" blades - .010, .012, .013, .015, .016, .017, .018, .019, .020, .022, .024, .025, .026, .028, .030, .032, .035" Metric markings included *T...

Cleans battery terminals and posts Metal body

One side designed to clean recessed terminals, other side cleans cable bolts and connectors

12" (30cm) strap fits all 6 and 12 volt top terminal batteries Max carry weight 15kg

Set of heavy-duty clamps allows easy repair of jumper cables Copper Plated Steel connectors rated at 400 amps

For use with push-lock connectors found on Ford transmission cooler lines and fuel injection systems

Disconnects the hydraulic clutch line from the clutch slave cylinder

Releases the fitting that connects the heater hose to the engine block and thermostat housing

Release the fitting found on the transmission/radiator oil cooler line Diameter: 13mm or 33/64"

Removes the fuel line from center port of fuel sending unit Sizes: 3/8" 5/16"

Separates tie rod ends from steering knuckles, idler arm and Pitman arms Prevents damage to steering components OAL: 16" (40cm)

Swivel tipped forcing screw aligns to the tie rod stud to prevent damage Heavy-duty forged body Services imports and many FWD vehicles, includi...

Separates ball joints from the steering knuckle making replacement and disassembly of front suspensions easy Prevents damage to suspension...

For removing and installing front hub/axle nuts 1/2" square drive 27mm X 6 Point

For removing and installing front hub/axle nuts 1/2" square drive Size: 33mm Point: 6

For removing and installing front hub/axle nuts 1/2" square drive Size: 38mm Point: 6

For removing & installing front hub/axle nuts & injectors Size: 30mm Point: 12 1/2" square drive OAL: 78mm / Depth: 50mm Applications: ...

For removing and installing front hub/axle nuts 1/2" square drive Size: 32mm Point: 12 Comparable to OEM # 11 6 462

For removing and installing front hub/axle nuts 1/2" square drive Size: 34mm Point: 6

For removing and installing front hub/axle nuts 1/2" square drive Size: 36mm Point: 6 Applications include, but are not limited to: 2001 Jeep Ch...

For removing and installing front hub/axle nuts 1/2" square drive Size: 39mm Point: 12 Comparable to OEM #112440

For removing and installing front hub/axle nuts 1/2" square drive Size: 24mm Point: 6

For removing and installing front hub/axle nuts 1/2" square drive Size: 29mm Point: 6

For removing and installing front hub/axle nuts 1/2" square drive Size: 35mm Point: 6

"Double-D" socket holds shock piston stem while deep socket is used to remove the nut Internal dimensions: .33"(8mm) long x .25"(6mm) wi...

For removing and installing front hub/axle nuts 1/2" square drive Size: 34mm Point: 12